Motorola B803 사용자 설명서 - 페이지 17

{카테고리_이름} Motorola B803에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola B803 47 페이지. Dect 6.0 cordless answering system with bluetooth wireless technology
Motorola B803에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄

screen, and the light of the corresponding Bluetooth button on the telephone base will be on

steadily.

NOTE

If the connection between the paired device and the telephone base does not resume by

manually connecting the device on the paired device list, you will need to unpair or de-register the

device from the cellular phone. Make sure the device is no longer on the paired list after de-

registration; then follow the steps in section Pairing a device as above to start the pairing

procedures again.

Replace a paired device

If you want to pair and connect a new device when there are already two devices paired with the

telephone base, press and hold the Bluetooth button (which you want to terminate the

corresponding connection) on the telephone base until the corresponding Bluetooth LED is

flashing, the connection via this Bluetooth button will be terminated automatically, then start with

step two of section Pairing a cellular phone or Pairing a Bluetooth headset. If you do not pair

a new device within two minutes, the Bluetooth LED flashes on the telephone base will turn off

and the system will return to idle mode.

3.3

Calls

3.3.1

Make a HOME call

• Press HOME/FLASH or SPEAKER, then enter the telephone number.

3.3.2

On-hook dialing (pre-dialing)

• Enter the telephone number. Press DELETE/MUTE or OFF/BACK to make corrections when

entering the phone number.

• Press HOME/FLASH or SPEAKER to dial.

3.3.3

Answer a HOME call

• Press HOME/FLASH or SPEAKER.

3.3.4

End a HOME call

• Press OFF/BACK or return the handset to the telephone base or charger.

The screen displays the elapsed time as you talk (in hours, minutes and seconds).

3.3.5

Call waiting on the HOME line

If you subscribe to call waiting service with your local telephone service provider, you will hear a

beep if someone calls while you are already on a call.

Press HOME/FLASH to put your current call on hold and take the new call. You can press

HOME/FLASH at any time to switch back and forth between calls.

3.3.6

Receive a CELLULAR call while on a HOME call

While on a HOME call and there is an incoming CELLULAR call, CELLULAR LED on the

handset will flash and you will hear a short beep.

To answer the incoming CELLULAR call:

• Press CELLULAR on the handset. The HOME call will automatically be placed on hold and

HOME/FLASH will start flashing.

To end the CELLULAR call:

• Press OFF/BACK on the handset. The HOME line will still be on hold. HOME LINE HELD will

appear on the screen display.

To resume the HOME call already on hold:

• Press HOME/FLASH on the handset.