Motorola D1000 Series 빠른 시작 매뉴얼

{카테고리_이름} Motorola D1000 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola D1000 Series 2 페이지. D1000 / d1010 series
Motorola D1000 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

D1000 / D1010 Series

Quick Start Guide

Getting started

Using the phone

Help

This Quick Start Guide provides all the information you need to get you

started. If you need more detailed instructions, a full user guide is available

to download in PDF format from:

www.motorola.com/cordless-phones

Please consider the environment before printing.

Digital cordless phone

D1000

Digital cordless phone with answering machine

D1010

Getting started

Step 3. Charge the handset

• When the handset is fully

charged, plug the telephone line

• Insert the 2 x AAA NiMH

cord into the socket marked

batteries supplied into the

on the underside of the base

handset and slide the battery

and plug the other end into the

compartment into place.

telephone wall socket.

• Place the handset on the

charger and charge for at least

Warning!

24 hours. When the handset is

Use only rechargeable batteries.

fully charged, the

icon is

If non-rechargeable batteries

displayed.

are used

WARNING BATT

will

be displayed and charging will

be stopped. Please replace with

rechargable batteries.

Box Contents

D1001/D1011

D1001 base or D1011 base

handset

Mains power

Telephone line cord

adaptor for the base

with clear connector

D1000 / D1010 Series

Quick Start Guide

Getting started

Using the phone

Help

This Quick Start Guide provides all the information you need to get you

started. If you need more detailed instructions, a full user guide is available

to download in PDF format from:

www.motorola.com/eu/radios/technicaldocumentation.

Please consider the environment before printing.

Digital cordless phone

D1001

Digital cordless phone with answering machine

D1011

2 x AAA NiMH

Screws and

Quick Start

rechargeable

wall plugs for

Guide

batteries

wall mounting

Step 4. Select country

Step 5. Set Date and Time

• After charging your phone, the

• Press

and scroll

Welcome screen appears.

CLOCK/ALARM.

• WELCOME is displayed and

• Press

. Display shows DATE

scrolls in different languages.

& TIME, then press

• Press

. A list of countries is

• Enter the date using the format

shown on the display.

DD/MM.

• Scroll

• Press

and enter the

your country and press

time using the 24 hour format

HH:MM.

• Press

to conﬁ rm.

• Press

to conﬁ rm.

The handset and base will be reset

to load the correct settings and the

NOTE

standby screen is displayed.

If you have subscribed to your

network's Caller Display service, the

date and time is set automatically

for all handsets every time a call is

received.

Your phone is now ready for

use.

If you have purchased a multiple

Important

pack you will also have the

Only use the telephone line cord

following additional items:

supplied. This equipment is not

designed for making emergency

D1002/D1012

telephone calls when the power

• 1 x Additional handset and

fails. Alternative arrangements

charger

should be made for access to

emergency services.

• 2 x AAA NiMH rechargeable

batteries

• 1 x Mains power adaptor for

Warning!

charger with red connector.

Use only rechargeable batteries.

D1003/D1013

• 2 x Additional handsets and

chargers

• 4 x AAA NiMH rechargeable

batteries

• 2 x Mains power adaptors for

charger with red connector.

D1004/D1014

• 3 x Additional handsets and

chargers

• 6 x AAA NiMH rechargeable

batteries

• 3 x Mains power adaptors for

charger with red connector.

Handset

Earpiece

Display

Menu key

Enter the main menu.

Select the option displayed on

screen.

Conﬁ rm menu option - OK is

displayed on screen.

Talk / Recall

Make or answer calls

Use recall (R) functions

Navigator glow ring

lluminates when the phone is

in use. Flashes to indicate new

event, eg. missed call.

/ Keypad Lock

Press and hold to lock/unlock

the keypad.

During a call, press and hold to

switch from pulse dialling to tone

dialling.

Dial a star

Handsfree key

Activate and deactivate the

loudspeaker during a call.

Intercom (at least 2

handsets needed)

In standby mode, use to make an

internal call.

During a call, use to transfer an

external call to another handset.

Getting started

Step 1. Set up the base

• Plug the mains power cable

(with a clear connector) into

the socket marked

on the

underside of the base and plug

the other end into the mains

power wall socket.

• Switch on the power supply

Tip

Position the base at least 1

metre away from other electrical

appliances to avoid interference.

Putting it as high as possible

ensures the best signal.

Display icons

Call Log / Scroll up /

On when the line is in use.

Volume up

Flashes when there is an incoming call.

Open the calls log.

Scroll up through lists and settings.

Flashes when you have new voicemail messages.

Increase the earpiece volume

Off when you have no voicemail messages.

during a call.

Redial / Scroll right / Clear

Flashes when you have missed calls and new number(s) in the

/ Mute

Calls list.

Open the redial list. Scroll to

the right.

Phonebook is open.

Delete characters on screen when

entering names and numbers.

The alarm clock has been set.

Mute/unmute the microphone

during a call.

Handsfree mode.

Go back to previous menu level

BACK is displayed.

Handset ringer is off.

Phonebook / Scroll down /

Volume down

Answering machine On. Off when answering machine is off.

Open the phonebook.

Flashes when you have new messages. Flashes fast when the

Scroll down through lists and

memory is full. (For D1010 series only)

menus.

Decrease the earpiece volume.

Steady when the handset is registered and within range of the

End / Exit / Switch handset

base. Flashes when the handset is out of range or searching for

on/off End a call.

base.

When in a menu, go back to

standby mode.

The approximate power levels of your battery are indicated as below:

Press and hold to switch handset

off (when in standby) or on.

Battery is fully charged.

# / Ringer Off / Pause

Battery is partially charged.

Press and hold to switch handset

ringer on and off.

Battery is running low.

When dialling or storing a

number, press and hold to enter

Flashes when battery is almost discharged. The handset will emit

a pause (P).

a warning beep during a call every 60 seconds.

Dial a #.

Important

The base station must be plugged

into the mains power at all times.

Do not connect the telephone line

cord into the wall socket until the

handset is fully charged. Only use

the power and telephone cables

supplied with the product.

Step 2. Connect the charger

(Multi-pack only)

• Plug the mains power cable

(with a red colour connector)

into the socket marked

the underside of the charger

and plug the other end into the

mains power wall socket.

• Switch on the power supply.