Motorola D1001 사용자 설명서 - 페이지 19
{카테고리_이름} Motorola D1001에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola D1001 26 페이지. Digital cordless phone
Motorola D1001에 대해서도 마찬가지입니다: 사용자 설명서 (45 페이지), 사용자 설명서 (26 페이지), 사용자 설명서 (50 페이지)
페이지 인쇄
Register a handset
At the base:
p
1. Press and hold the
button on the base station for at least 3 seconds. The base station
emits a beep when it is ready to accept registration. You have 90 seconds in which to register
a handset.
At the handset:
m
d
1. Press
and scroll
to
ADVANCED SET
d
m
2. Scroll
to
REGISTRATION
and press
.
u
d
3. If necessary, scroll
or
to display
REGIST. BASE
the registered base number is flashing. Enter the number of the base on which you wish to
register your handset.
1
If you have only 1 base station, press
4. When the display shows PIN----, enter the base PIN.
-
When the handset registers with the base, it is assigned a handset number.
Select a base
You can register your D1000 handset with up to 4 bases. Once registered, you can switch
between bases, for example, bases at home and at work.
m
d
1. Press
and scroll
to
ADVANCED SET
d
m
2. Scroll
to
REGISTRATION
and press
.
m
3.
SELECT BASE
is displayed. Press
.
-
The available bases are displayed with the current base number flashing.
4. Enter the number of the base you want – 1,2,3 or 4 and press
-
When the base is found you hear a beep. If not found, the display shows UNREGISTERED.
Unregister a handset
m
d
1. Press
and scroll
to
ADVANCED SET
d
m
2. Scroll
to
UNREGISTER
and press
.
m
3. Enter the 4 digit master PIN and press
-
Display shows the registered handset numbers.
u
d
4. Scroll
or
to select the handset you want to delete and press
-
UNREGISTERED
is displayed on the handset screen.
PIN
The 4-digit master PIN is used when registering or unregistering a handset and when changing
some settings on your D1000. The default setting is 0000. You can change this PIN for more
security.
m
d
1. Press
, scroll
to
ADVANCED SET
and press
d
m
2. Scroll
to PIN. Press
.
3. Enter the current 4 digit master PIN and press
m
4. Enter the new PIN and press
.
NOTE
Make a note of your PIN. If you forget your PIN you will need to reset your product.
Advanced settings
m
and press
.
m
and press
.
BASE 1 2 3 4
is displayed and
1
. If you have 2 base stations, press
or
m
and press
.
m
.
m
and press
.
.
m
.
m
.
m
. (Default setting 0000).
Reset
This will reset your D1000 to its default settings.
m
d
1. Press
, scroll
to
ADVANCED SET
d
2. Scroll
to
RESET
UNIT. Press
3.
CONFIRM?
is displayed. Press
NOTE
Entries stored in the phonebook are retained.
Default settings
Handset name
Key tone
2
, etc.
First ring
Auto pick up
Auto hang up
Ringer melody
Ringer volume
Earpiece volume
Phonebook
Call log
Redial list
Master PIN
Keypad lock
Clock
Alarm
Dial mode
Auto prefix
You can set the D1000 to detect a dialling number and replace it with another number. The
number to be detected can be up to 5 digits long. It can be replaced with a number up to 10 digits.
m
d
1. Press
, scroll
to
ADVANCED SET
d
m
2. Scroll
to PREFIX. Press
3.
DETECT DIGIT
is displayed. Press
4. Enter the number you want to be detected and press
5. Scroll to
PREFIX
NUM. and press
6. Enter the number you want it replaced with and press
>
7. Press
to return to standby.
m
and press
.
m
.
m
.
Handset
On
On
On
On
Melody 1
High
3
Unchanged
Empty
Empty
0000
Off
00:00
Off
Tone
m
and press
.
.
m
.
m
.
m
.
m
.
19