Motorola D1101 사용자 설명서 - 페이지 13
{카테고리_이름} Motorola D1101에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola D1101 46 페이지. D1100 series
Motorola D1101에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
System PIN
The System PIN is used when changing certain settings and
registration / de-registration. The default setting is 0000. You
can change this to your own preferred number up to 8 digits.
When you enter a PIN the digits are shown as ****.
d
Menu
Settings
Select
1. Press
, scroll
to
and press
d
Set Base
Select
2. Scroll
to
and press
.
d
System PIN
Select
3. Scroll
to
and press
.
4. Enter the old PIN (original setting 0000) and press
OK
5. Enter the new PIN and press
.
OK
6. Re-enter the new PIN and press
.
Back
7. Press
to return to the previous menu level or
to standby.
Restore default settings
You can restore your D1100 to its default (original) settings.
It will not affect the phonebook, calls list or user's data,
including personal/recorded outgoing messages.
All handsets registered to the base will be retained. All text,
handset and base settings will be reset.
d
Menu
Settings
Select
1. Press
, scroll
to
and press
d
Set Base
Select
2. Scroll
to
and press
.
d
Master Reset
Select
3. Scroll
to
and press
.
Yes
No
4. Select
to confirm or
to cancel.
5. Enter the system PIN (original setting 0000) then press
Reset Compete
The display will show
and the unit will restart.
Base settings
Default settings
Handset Name
Handset External Ringtone
Handset Internal Ringtone
Handset Ring Volume
.
Receiver Volume
Key Beep
OK
.
Auto Talk
Screensaver
>
to return
Base Ringtone
Base Ring Volume
Dialling Mode
First Ring
System PIN
ECO Mode
Room Monitor
.
OK
.
ECO mode
To reduce the level of power emissions, you can select low
Handset
power or ECO mode. When the ECO mode is set to
Melody 3
base transmission power will be reduced.
Melody 1
To turn ECO Mode to
3
Menu
1. Press
d
4
2. Scroll
to
d
3. Scroll
to
On
u
4. Press
or
On
confirm.
Clock
The display will show
selection together with a confirmation tone.
Melody 1
Signal icon in
3
ECO mode
Tone
Off
0000
Off
Off
ON
When set to
signal icon.
NOTE
When ECO mode is set to
reduced.
On
, the
On
Off
or
:
d
Settings
Select
, scroll
to
and press
.
Set Base
Select
and press
.
ECO Mode
Select
and press
.
d
On
Off
Select
to highlight
or
then press
to
Set to ON
Set to OFF
or
depending on the
,
icon is displayed in place of the standard
ON
, the handset range will be
13