Motorola D1111 시작하기 매뉴얼 - 페이지 13

{카테고리_이름} Motorola D1111에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola D1111 30 페이지. D1110 series digital cordless phone with answer machine
Motorola D1111에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (43 페이지)

페이지 인쇄
Motorola D1111 시작하기 매뉴얼

System PIN

The System PIN is used when changing certain settings and
registration / de-registration. The default setting is 0000. You
can change this to your own preferred number up to 8 digits.
When you enter a PIN the digits are shown as ****.
d
Menu
Settings
1. Press
, scroll
to
and press
d
Set Base
Select
2. Scroll
to
and press
.
d
System PIN
Select
3. Scroll
to
and press
.
4. Enter the old PIN (original setting 0000) and press
OK
5. Enter the new PIN and press
.
OK
6. Re-enter the new PIN and press
.
Back
7. Press
to return to the previous menu level or
to standby.

Restore default settings

You can restore your D1110 to its default (original) settings.
It will not affect the phonebook, calls list or user's data,
including personal/recorded outgoing messages and answer
machine messages.
All handsets registered to the base will be retained. All text,
answer machine, handset and base settings will be reset.
d
Menu
Settings
1. Press
, scroll
to
and press
d
Set Base
Select
2. Scroll
to
and press
.
d
Master Reset
Select
3. Scroll
to
and press
.
Yes
No
4. Select
to confirm or
to cancel.
5. Enter the system PIN (original setting 0000) then press
Reset Compete
The display will show
and the unit will restart.
Base settings

Default settings

Handset Name
Handset External Ringtone
Handset Internal Ringtone
Handset Ring Volume
Select
.
Receiver Volume
Key Beep
OK
.
Auto Talk
Screensaver
>
to return
Base Ringtone
Base Ring Volume
Dialling Mode
First Ring
System PIN

ECO Mode

Room Monitor
Select
.
Answer Machine
Outgoing Message
Ring Delay
OK
.
ECO mode
To reduce the level of power emissions, you can select low
Handset
power or ECO mode. When the ECO mode is set to
Melody 3
base transmission power will be reduced.
Melody 1
To turn ECO Mode to
3
1. Press
4
2. Scroll
3. Scroll
On
4. Press
On
confirm.
Clock
The display will show
selection together with a confirmation tone.
Melody 1
Signal icon in
3
ECO mode
Tone
Off
0000
Off
Off
On
Answer & Record
5 rings
When set to
signal icon.
NOTE
When ECO mode is set to
reduced.
On
Off
or
:
d
Menu
Settings
Select
, scroll
to
and press
.
d
Set Base
Select
to
and press
.
d
ECO Mode
Select
to
and press
.
u
d
On
Off
Select
or
to highlight
or
then press
Set to ON
Set to OFF
or
depending on the
ON
,
icon is displayed in place of the standard
ON
, the handset range will be
On
, the
to
13