Motorola D513 사용자 설명서 - 페이지 7

{카테고리_이름} Motorola D513에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola D513 46 페이지. Digital cordless telephone with digital answering machine
Motorola D513에 대해서도 마찬가지입니다: 사용자 설명서 (45 페이지)

페이지 인쇄

1. Getting Started

1. Plug the telephone line cord into the socket marked

on the underside of the base.

2. Plug the power adaptor with clear connecter into the

socket marked

on the underside of the base and

plug the other end into the mains power wall socket.

Switch on the mains power.

Installing and charging the handset

1. Remove the battery cover from the back of the handset

and insert the 2 x rechargeable Ni-MH battery cells

supplied. Please note the '+' and '-' markings inside the

battery compartment and insert in the correct direction.

2. Slide the battery cover back into place.

3. If you are charging the batteries for the first time, place

the handset on the base to charge for at least 24 hours

continuously.

4. When the handset is fully charged,

appear steady on the display. Plug the other end of the

telephone line cord (make sure that one end is already

plugged into the base) into the telephone wall socket.

Connecting the handset and charger

(for multi-pack only)

If you have purchased a multiple pack, you will need to carry

out this process for all the handsets and chargers.

Getting started

1. Plug the power adaptor with red connecter into the

socket marked

and plug the other end into the mains power wall socket.

2. Remove the battery cover from the back of the handset

and insert the 2 x AAA NiMH rechargeable batteries

supplied. Please note the '+' and '-' markings inside the

battery compartment and insert in the correct direction.

icon will

3. Slide the battery cover back into place.

4. If you are charging the batteries for the first time, place

the handset on the charger to charge for at least 24

hours continuously.

5. When the handset is fully charged,

appear steady on the display.

The display will show the time and handset number

(e.g. 2) to indicate that it is registered to the base.

on the underside of the charger

icon will