Motorola H204 사용자 설명서 - 페이지 19

{카테고리_이름} Motorola H204에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola H204 30 페이지. Dect 6.0 digital cordless phone; dect 6.0 digital cordless phone with answering system
Motorola H204에 대해서도 마찬가지입니다: 사용자 설명서 (31 페이지)

페이지 인쇄
Motorola H204 사용자 설명서

3.17.9 Remote access

Remote access allows you to operate your answering machine and listen
to your messages by calling your phone from another phone.
Turn the remote access on/off
1. Press MENU and VOL+ or REDIAL/VOL- to select
2. Press MENU and VOL+ or REDIAL/VOL- to select
3. Press MENU and VOL+ or REDIAL/VOL- to select
4. Press MENU to confirm.
To enter the remote access mode, dial your phone number from another
phone, when you hear the announcement, press TONE/* and then enter
the 4-digit remote security code (default code is 0000).
The correct sequence of the 4 security PIN digits needs to be detected
before entering remote access mode. Random digits detected prior to the
correct 4 digits sequence are ignored, and answering machine recording
continues until the complete PIN is detected. There is no system prompt to
enter the remote access code.
Press the following keys on your handset to perform the following
functions, after entering your remote access mode.
Press...
To...
1
Repeat message
2
Play/Stop message
3
Skip forward to the next message
4
Toggle Answer Off/Announce Only/Announce
and Record modes
7
Listen to the Main Menu (for Full Voice
prompts only)
0
Delete message
Using the phone

3.17.10 Set the security code

This is used to change the remote access PIN if necessary.
1. Press MENU and VOL+ or REDIAL/VOL- to select
2. Press MENU and VOL+ or REDIAL/VOL- to select
ANSWER MACHINE
.
3. Press MENU and enter the 4-digit security code.
REMOTE ACCESS
.
4. Press MENU to save.
ON
OFF
or
.
3.17.11 Using the answering machine through the handset back
You can also operate your answering machine through the 5 handset back
keys.
3.17.11.1 Turn on or off the answer machine
Press ANS ON/OFF to turn the answering system on or off.
3.17.11.2 Play messages
1. Press
sequence they are recorded following by any older messages.
2. During message playback, press the keys below to perform the
following functions:
X
keys
from idle mode. New messages will be played in the
Stop playing messages.
Skip to play the next message.
Press once to replay current message from the
beginning. Press twice to playback the previous
message.
Delete the current message.
ANSWER MACHINE
.
SECURITY CODE
.
19