aculab Prosody X 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} aculab Prosody X에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. aculab Prosody X 13 페이지. 1u high availability chassis
aculab Prosody X에 대해서도 마찬가지입니다: 설치 매뉴얼 (20 페이지)

페이지 인쇄

Prosody X Installation guide

1.3

Configuring the Prosody X 1U High Availability Chassis

In order to use the TDM, Media Processing and VoIP capabilities the Prosody X cards in

the system need to be configured. If you wish to use the functionality provided by the HPI

Interface then this must be configured. These can both be configured via the Aculab

Configuration Tool that can be run from the start menu.

1.3.1 Configuring the HPI Interface

Step 1: In the views section of the ACT select the HPI Configuration option. In the right

hand pane the all the available HA Chassis on the local network will be revealed.

Step 2: Check the serial number on the right hand side of the front panel of the HA Chassis.

This serial number should be present in the list of available chassis.

Step 3: Select the chassis and select edit.

6 of 13