Motorola IT.6.4X 사용자 설명서 - 페이지 31
{카테고리_이름} Motorola IT.6.4X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola IT.6.4X 44 페이지.
페이지 인쇄
M
1. Press
, scroll
d
2. Scroll
to
Recall Time
u
d
e
3. Press
or
to select the setting you want: Short, Medium, Long.
M
4. Press
to confirm.
5. Press
to return to standby.
NOTE
The functionality of your IT.6X cannot be guaranteed on all PABX.
SHORT-100ms, MEDIUM-250ms & LONG-600ms.
8.5
Dial mode
The default IT.6X dialling mode is suitable for your country and network operator. It is
unlikely that you should need to change this setting unless advised to do so.
M
1. Press
, scroll
d
2. Scroll
to
Dial
u
d
e
3. Press
or
to select
M
4. Press
to confirm.
5. Press
to return to standby.
8.5.1
Temporarily switch from Pulse to Tone dialling
1. In talk mode press and hold
The dial mode will change from Pulse to Tone for the duration of the call.
8.6
Registration
Up to 4 handsets can be registered to one base station. Additional handsets must be
registered to the base before you can use them.
•
The Master PIN is required before you can register or unregister handsets. The default
PIN is 0000.
8.7
Register a handset
At the base:
1. Press and hold the
which to register a handset.
On the handset:
M
1. Press
, scroll
d
2. Scroll
to
Register
3. When the display shows PIN, enter the base PIN and press
When the handset registers with the base, it is assigned a handset number.
Advanced settings
d
to
Advanced Set
is displayed. Press
d
to
Advanced Set
M
Mode. Press
.
Tone
or Pulse.
l
for 2 seconds.
p
button on the base for 5 seconds. You have 120 seconds in
d
to
Advanced Set
M
and press
.
M
and press
.
M
.
M
and press
.
M
and press
.
M
.
31