Motorola T112 매뉴얼 - 페이지 8

{카테고리_이름} Motorola T112에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola T112 44 페이지. Digital cordless telephone with digital answering machine

4. When the handset is fully charged, the

the other end of the telephone line cord (make sure that one end is already plugged

into the base) into the telephone wall socket.

Connecting the handset and charger (for multi-pack only)

If you have purchased a multiple pack, you will need to carry out this process for all the

handsets and chargers.

1. Plug the power adaptor into the socket marked

and plug the other end into the mains power wall socket.

2. Remove the battery cover from the back of the handset and insert the 2 x AAA Ni-MH

rechargeable batteries supplied. Please note the '+' and '-' markings inside the battery

compartment and insert in the correct direction.

3. Slide the battery cover back into place.

4. If you are charging the batteries for the first time, place the handset on the charger to

charge for at least 16 hours continuously.

5. When the handset is fully charged, the

display will show

to the base.

IMPORTANT

Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-MH 300mA

rechargeable batteries) supplied with your T1.

BATTERY LOW WARNING

If the

icon flashes on the display and you hear a warning beep every minute during a

call, you will need to recharge the handset before you can use it again.

When charging, the

HANDSET

and handset number (e.g. 2) to indicate that it is registered

icon will scroll on the display.

icon will appear steady on the display. Plug

on the underside of the charger

icon will appear steady on the display. The

Getting started