Motorola W375 사용자 설명서 - 페이지 17
{카테고리_이름} Motorola W375에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola W375 28 페이지. Brochure
Motorola W375에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지), 제품 데이터 시트 (2 페이지), 브로셔 (1 페이지)
페이지 인쇄
set up a text entry mode
To set your Primary and Secondary text entry
modes, press M > Entry Setup in a text entry
view and select Primary setup or Secondary setup.
iTAP
®
mode
Press # in a text entry screen to switch to
iTAP mode. If you don't see j or p, press
M > Entry Setup to set iTAP mode as your
primary or secondary text entry mode.
iTAP mode lets you enter words using one
keypress per letter. The iTAP software
combines your keypresses into common
words and predicts each word as you enter
it.
44
basics
volume
You can adjust the earpiece speaker volume
while you are talking by pressing S right/
up to increase the volume or left/down to
decrease the volume. You can also adjust
the volume by pressing the side volume
keys.
Tip: During a call, you can set your phone to
mute by pressing M > Mute.
navigation key
Press the navigation key
S up, down, left, or
right to scroll and
highlight options.
46
basics
For example, if you press 7764, your
phone displays:
ã?
4
h
xå
Message
765
ì
h
Press Delete
Press SELECT
key to delete
key to enter
prog
proh spoi
prog.
last letter.
Delete
SELECT
• If you want a different word (such as
Progress), continue pressing keypad
keys to enter the remaining
characters.
• Press 1 to enter punctuation or
other characters.
handsfree speaker
You can use your phone's handsfree
speaker to make calls without holding the
phone to your ear.
During a call, press SPKR ON to turn the
handsfree speaker on. When your handsfree
speaker is on, you can press SPKR OFF to turn
it off.
Note: The handsfree speaker does not work
when your phone is connected to a
handsfree car kit or headset.
tap mode
Press # in a text entry screen to switch to
TAP mode. If you do not see g or m, press
M > Entry Setup to set TAP mode as your
Primary or Secondary text entry mode.
To enter text in TAP mode, press a keypad
key repeatedly to cycle through the letters
and number on the key. Repeat this step to
enter each letter.
For example, if you press 8 one time, your
phone displays:
Character
ã?
displays at
h
xå
4
Message
765
ì
h
insertion
T T
Press Delete to
point.
erase the
character to
Press OK to
left of insertion
accept &
point.
store text.
Delete
OK
codes & passwords
Your phone's unlock code is originally set to
1234. The security code is originally set to
000000. If your service provider didn't
change these codes, you should change
them:
Find it: Press M > Settings > Security
> New Passwords
You can also change your SIM PIN or call
barring passwords.
If you forget your unlock code: At the
Enter Unlock Code: prompt, try entering
1234 or the last four digits of your
phone number. If that doesn't work, press
M and enter your security code instead.
If you forget your other codes: If you forget
your security code, SIM PIN code, PIN2
code, or call barring password, contact your
service provider.
After 2 seconds, the character is accepted
and the cursor moves to the next position.
numeric mode
In a text entry screen, press # to switch
entry modes until the 12 (numeric) indicator
is displayed.
Press keypad keys to enter the numbers you
want. When you finish entering numbers,
press # to switch to another entry mode.
symbol mode
In a text entry screen, press # to switch
entry modes until the @ (symbol) indicator is
displayed.
Press keypad keys repeatedly to cycle
through its symbols. Highlight the symbol
you want, then press SELECT.
basics
45
check battery meter
To check your battery meter:
Press M > Settings > Phone Status
> Battery Meter.
47
basics