Motorola 89FT3798 매뉴얼 - 페이지 18
{카테고리_이름} Motorola 89FT3798에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola 89FT3798 32 페이지.
페이지 인쇄#ELP_Display.book Page 18 Friday, May 14, 1999 5:39 PM
SCAN
You can monitor several channels in order to
receive any call that is transmitted on any of
these channels. Sixteen different channels can
be programmed into each scan list by the dealer.
Once the radio's scan operation is activated and
the radio detects a call coming through a
channel in its scan list, it switches to that
channel for you to receive the call.
NOTE: The same channels can be assigned to
different scan lists.
STARTING OR STOPPING A SCAN
OPERATION
The E symbol, and the channel you are
transmitting on, will appear on the LCD screen
when you start a scan operation.
The LED indicator blinks green during a scan
operation, and stops blinking when the radio
switches to a channel.
NOTE: If you enter Menu Mode while the radio is
scanning, scanning will stop. It will resume when
you exit Menu Mode.
18
English
To start or stop a scan operation:
1.
Press the preprogrammed Scan button to
start a scan operation. You will hear a positive
indicator tone.
2.
Press the preprogrammed Scan button again
to stop the scan operation. You will hear a
negative indicator tone.
—or—
)
1.
to enter Menu Mode.
<
>
2.
or
SCAN
until
)
3.
to select
SCAN
<
>
4.
or
until
ON
(to start a scan operation),
or until
OFF
(to stop a scan operation).
)
5.
to select the desired option.
NOTE: The LED indicator will blink (green) during a
scan operation. It will stop blinking when the
radio switches to a channel.