Motorola APX 7500 커뮤니케이션 매뉴얼
{카테고리_이름} Motorola APX 7500에 대한 커뮤니케이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola APX 7500 2 페이지. Multiband mobile radio
Motorola APX 7500에 대해서도 마찬가지입니다: 브로셔 (8 페이지), 제품 사양서 (5 페이지)
페이지 인쇄
LASD Motorola APX 7500 - 07 Control Head
Power
On - Off
Display
Dimmer
Accessory
Port
Soft Keys
Soft / 4 way nav key menu information:
ZnDn
ZnUp
Nuis
ScnL
Zone
Sql
ZnDn
ZnUp
Chan
Dir
Zone
Scan
ScnL
Nuis
Mon
Sql
Pwr
Phon
13 Sep 2016
Communications Solutions 323-881-8033
Note: This information may change with out notice. JRH
This Radio normally has LASD UHF channels and may or may not be configured with a
second radio frequency band in VHF or 800/700 MHz
Multi Function Knob
Status LED's
(Push & Release to change Channels, MFK display symbol will flash green,
knob reverts to Volume after 5 seconds if not used)
Transmit
Receive
Not used
MOTOROLA
Line 1 = ZONE / MODE INFORMATION
Line 2 = CHANNEL INFORMATION
SOFT KEY INFORMATION
ZnDn
ZnUp
4 Way Navigation Keys
(Use Left / Right to change menus
Slect "Chan" use up/down to change channels)
Scan
Dir
Mon
Chan
Pwr
Phon
Changes Zones up or down ( 1 through 50+ Zones )
Channels in the current Zone and can be selected via the keypad or 4 way Nav
Keys (Press Chan enter 1 to 16 or on some zones up to 112 & press slect)
Changes from repeat to direct, this will not be show if the channel is direct only
Shows Zones and you can select the Zone number via the numeric keypad
Turns the Scan on or off
Used to edit and/or read the Scan list
Press to skip scanned channel due to noise, ( turn radio off and on to reset )
Bypasses the Squelch control to hear a distant unit, push and release to reset
Adjusts the Squelch control when in a high static noise area ( adjust settings 1 to 15 )
Available only in command vehicles, High/Low power selection, for use with ACU's
and other specialized equipment
Available only on MEDCOR 9 (Z-45), Press and release the Phon button, use the 4 way
Nav key or the key pad to select the phone number, press and release the PTT to dial
"MFK"
AID 5358
H
Scan
Dir
Main Menu
Menu 2
Menu 3
Warning: Scanning can distract the user from their
home frequency traffic.
You can not talk on a scanned channel unless you
place the radio on the correct mode and channel.
- Volume
/ Channel
"
Default"
Not Used
07
1
2
3
,.?
ABC
DEF
4
5
6
GHI
JKL
MNO
7
8
9
PQRS
TUV
WXYZ
#
0
*
Home SCC (Long press) /
Exit or Back (Short press)
See page 2 for keypad presets
Display Symbols:
Tone Indicator
Scanning is on
Radio is in direct
H
Radio is on High Power
Multi Function Key "MFK"
is active to change the
Channel
Page 1 of 2