Motorola CM160 사용자 설명서 - 페이지 17

{카테고리_이름} Motorola CM160에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CM160 46 페이지. Commercial series controlhead
Motorola CM160에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지), 서비스 정보 (26 페이지), 기본 사용 설명서 (12 페이지)

페이지 인쇄
Motorola CM160 사용자 설명서

RECEIVE

1
Turn your radio on.
2
Adjust the radio's volume, if necessary.
G
H
3
or
to select the desired channel.
•
Make sure the PTT button is released.
4
Listen for voice activity.
•
The red LED indicator flashes while your
radio is receiving.
5
To respond, hold the microphone vertically 2.5
to 5 cm from your mouth. Press the PTT button
to talk; release it to listen.

MONITOR

It is important to monitor traffic before transmitting to
ensure that you do not "talk over" someone who is
already transmitting.

Silent Monitor

1
A short press of the preprogrammed Monitor
button places the radio in Silent Monitor
mode.
•
You hear a high-pitched tone, then any
communications on channel. Wait until the
channel is quiet before sending a call..
A short press of the Monitor button cancels
2
Silent Monitor mode and returns the radio to
normal operation.

Open Squelch Monitor

1
To place the radio in Open Squelch mode,
press and hold the preprogrammed Monitor
button until you hear a high-pitched tone.
•
If no activity is present, you will hear "white
noise."
2
Momentarily press the Monitor button to
return to normal operation.
Note: Depending on how your radio has been
programmed, per channel for transmit and
receive conditions, when the microphone has
been taken off-hook, the radio will go into Open
Squelch mode.
English
15