Motorola GM1200 Series 사용자 설명서 - 페이지 12
{카테고리_이름} Motorola GM1200 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GM1200 Series 19 페이지. Gm series professional radio
Motorola GM1200 Series에 대해서도 마찬가지입니다: 서비스 매뉴얼 (28 페이지)
Special Calls
To scroll on a word basis, press keypad button
to scroll forward through the message and keypad
button
to scroll backwards. The display shows
2
as many complete words as the display allows, after
which they are split and displayed section by
section.
Press Edit
(7) to return to the SDM stack
interrogate mode to select and display other SDMs.
Deleting Messages from the SDM Stack
Pressing either Clear button
will delete the currently selected SDM from
#
the stack. The radio returns to the SDM stack
interrogate mode after each deletion until the last
message is deleted when the display returns to the
idle state and the SDM icon
Status replies to an SDM
Where an SDM contains a calling party number, the
radio can respond with a status message.
From the SDM stack interrogate mode or SDM
scrolling mode, press the status key
radio will exit the data mode and enter the dialling
state for example:
12
Special Calls/Short Data Messages
English
8
(6) or keypad keys
C
is extinguished.
(9). The
S
213S
The status digits can then be specified as in normal
status mode.
Making an SDM Call
SDM calls may be set up in one of three ways, via
the data key
, manually via the keypad or via the
D
shortform dialling feature.
To make an SDM call via the data key, select the
desired address as detailed in Making a Call, press
the
key (14) followed by the data message
D
string which may only consist of digits (0-9).
i.e. ADDRESS (
) DATA
D
To make an SDM call via the keypad, enter
followed by the data message string
2
(digits 0-9), press
followed by the desired
address as described in Making a Call.
i.e.
DATA
2
Note:
The maximum data message size is limited to 20
characters which includes address information
and data selection characters.
To make an SDM call via the shortform dialling
feature, select the pre-programmed address and
send the message as detailed in Shortform
Dialling.
Note:
The maximum data message size is limited to 14
characters which includes address information
and data selection characters.
ADDRESS