Motorola GM1200E 사용자 설명서 - 페이지 18

{카테고리_이름} Motorola GM1200E에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GM1200E 22 페이지. Dealer programming software dps
Motorola GM1200E에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (36 페이지)

페이지 인쇄

Personality Selection

MPT Mode

On selection of an MPT personality, the display

shows:

FREETEXT

where NNN is the unit number and FREETEXT is

the pre-programmed text string of the selected

personality.

Conventional Mode

In the conventional mode the radio operates as a

standard two-way radio.

On selection of a conventional personality as

described above, the display shows:

CHANNEL 01

FREETEXT

where 01 is the channel number and FREETEXT is

the pre-programmed text string of the selected

personality.

Use the Up/Down Scroll buttons (8) to display the

desired channel for the selected personality.

Personality Selection/MPT Mode/Conventional Mode

English

Prior to transmission always make sure that the

channel is free (red LED not ﬂashing). Press the

PTT key (18) to transmit, release it to listen. The red

LED lights while the radio transmits and ﬂashes if

the channel is busy.

Some channels may be monitored for activity by

NNN

pressing the monitor button

be lit until the channel is changed or the monitor

button

also light brieﬂy when the microphone is taken out of

its holder, indicating that monitor is automatically

selected for a short duration. Please consult your

dealer for further information.

In the conventional mode the radio is equipped with

a time out timer. A speech limitation warning will

sound a few seconds before the transmitter is

switched off. The call timed out tone will sound, until

the PTT is released.

To generate the DTMF tones press and hold the

PTT (18) while entering the desired number.

(10). The

(10) is pressed again. The

icon will