Motorola GM350 사용자 설명서 - 페이지 5

{카테고리_이름} Motorola GM350에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GM350 7 페이지. Remote mount kit
Motorola GM350에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 설치 매뉴얼 (10 페이지)

페이지 인쇄

Single Tone Selective Calling

Single tone encode facilities are provided to enable

selective calling, or Repeater Access. Both models

may be enabled to initiate single tone selective

calls; however, only the 128-channel model only

may be enabled to receive single tone selective

calls.

Single Tone Encode - 4-channel and 128-

channel models

Subject to radio conﬁguration, single tone selective

calling may be initiated automatically from the PTT

(11) or from a suitably programmed option button (6,

9).

Single Tone Decode - 128-channel model only

Subject to radio conﬁguration, single tone selective

calling may be required to receive a message on

any pre-selected channel(s). When a selective call

is received, you will hear the Call Alert sounded

and the yellow LED (4) will ﬂash.

Please contact the person in charge of your radio

system or your local Motorola representative for

further information.

Option Button Functions

The following functions may be applicable to your

radio, activated by one of the function/option

buttons.

Single Tone Encode - Single tone encode may

be initiated manually by pressing suitably

programmed option buttons.

Repeater Talkaround - This feature enables the

transmit frequency on a channel to be switched

to the same as the channel's receive frequency.

This will allow a radio to communicate directly

with another without the need to use a repeater.

Monitor - One option button (usually 5) may be

programmed as Monitor. This feature allows the

user to switch between different receiver settings

programmed as Receive, Monitor 1 and Monitor 2.

Scan (128-channel model only) - The scan

feature will cause the radio to search through

predeﬁned lists of channels looking for a

condition that will cause the radio to unmute.

While searching for unmute conditions, the radio

is in 'active scan' (green LED ﬂashing and Scan

icon on); having found the required conditions,

the radio will 'land' on the channel (green LED

off, Scan icon stays on).

Option Button Functions

English