Motorola GM600 사용자 설명서 - 페이지 3

{카테고리_이름} Motorola GM600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GM600 11 페이지. Remote mount kit
Motorola GM600에 대해서도 마찬가지입니다: 서비스 매뉴얼 (28 페이지), 설치 매뉴얼 (10 페이지)

페이지 인쇄

Radio Controls

The numbers refer to the illustrations on the inside

front cover.

On/Off Button

Turns the radio on/off.

Microphone Connector

Volume Up/Down Control

Three Colour Indicators (LEDs)

Green, Flashing: Scanning.

Green, Continuous: Power On.

Yellow, Slow Flashing: Call setup requested.

Yellow, Fast Flashing: Call acknowledged or

Yellow, Continuous: Call In Progress.

Red, Continuous: Radio Transmitting.

Red, Flashing: Channel Busy (Conventional).

Scroll Up/Down

Used to scroll through the shortform dial entries

and radio idents to select for call.

Numeric Display

Three characters and icons.

Programmable backlighting.

Clear Button

For cancelling a call, clearing down at the end of a

call or Carrier Monitor (Conventional).

Base Call Button

For making calls to a commonly used, prepro-

grammed number.

Emergency call.

Select Buttons A,B,C,D

The select buttons A to C are either programmed

to operate as their assigned select/deselect modes

or to operate as a dedicated call. Select button D

can only be programmed to operate as a dedi-

cated call.

The select buttons A to D are programmed to oper-

ate in the following way:

A - Conventional Mode Select/Deselect, otherwise

a dedicated call button (if programmed).

B - Call in Absence Interrogate mode Select/Dese-

lect (display radio only), Call in Absence Callback

(non-display radio only), otherwise a dedicated call

button (if programmed).

C - External Alarm Select/Deselect, otherwise a

dedicated call button (if programmed).

D - Dedicated call button (if programmed).

10.

Select Button LEDs

If the select buttons are programmed to operate as

their assigned modes the LEDs function as fol-

lows:

A - On, continuous, indicates Conventional mode

selected. The LED will ﬂash whilst changing mode.

B - On, ﬂashing, indicates Call in Absence mes-

sage in stack (non-display radio).

C - On, continuous, indicates External Alarm

selected.

D - Not Used.

11.

Transmit (PTT) Button

Push to talk, release to listen.

Radio Controls

English