Motorola GM950 사용자 설명서 - 페이지 8

{카테고리_이름} Motorola GM950에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GM950 11 페이지. Remote mount kit
Motorola GM950에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지), 매뉴얼 (16 페이지), 매뉴얼 (18 페이지), 매뉴얼 (18 페이지), 설치 매뉴얼 (10 페이지)

페이지 인쇄

Option Button Functions

conditions, the radio will 'land' on the channel

(green LED off, Scan icon stays on). When a

priority channel is included in the current scan

list, the scan icon changes from

Nuisance Channel Delete - When in scan, if the

radio repeatedly 'lands' (stops) on a channel that

is currently of no interest, press this option

button when listening to the 'nuisance channel',

to temporarily remove the channel from the scan

list (until the radio is turned off then on again).

Backlight - This feature allows backlighting of

the buttons and display to be cycled between

low, medium and high settings.

External Alarm enable/disable

external alarm signal, generated by selective

call decode, on/off.

Memory Channel (display models only) - Up to

two option buttons may be programmed as

Memory Channels. To select the channel, press

the option button for a period of less than one

second. Optionally, pressing the button for longer

than one second selects the current channel as

that button's memory channel.

Option Button Functions

English

Voice Scrambler

with an optional speech scrambler module, two

further features may be programmed onto the

option buttons.

– Coded/Clear speech - the scrambler module

may be switched on and off to suit operational

requirements.

– Key Select - Allows selection of the key used

by the scrambler module.

Emergency Operation - May be set up in a

number of different ways The following

description is an example of one way.

In an emergency situation, press the

emergency button e.g. function button (6).

- Turns the

To avoid inadvertent activation of the

emergency function, the button has to be

pressed for a speciﬁed time. When the radio

enters emergency, it will commence a

preprogrammed cycle of alternating transmit

and receive periods.

The emergency procedure stops only when

either the radio receives a special call from

base, or reaches the maximum number of

transmit /receive cycles.

Note:

- When the radio is ﬁtted

This option may not be programmed in your

radio!