Motorola GP280 사용자 설명서 - 페이지 30

{카테고리_이름} Motorola GP280에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP280 46 페이지. Professional radio, power distribution and controller
Motorola GP280에 대해서도 마찬가지입니다: 서비스 정보 (32 페이지), 서비스 정보 (30 페이지), 사용자 설명서 (46 페이지), 서비스 정보 (30 페이지)

페이지 인쇄

11. The radio will return to

the home display.

Note: Once engaged in a private conversation, if

the radio is left idle for more than one minute, a

momentary warning alert sounds every six

seconds to remind you that dispatch calls are not

being heard. After two minutes, a permanent

invalid mode tone sounds.

Leaving a Call Alert Page

(GP280 radios only)

1. If the party you want to have a Private Call

does not answer the call within twenty

seconds, you can choose to leave a Call Alert

page. This leaves your radio's ID

number with the called radio so you can be

called back later.

2. Press the PTT switch to send the Call Alert

page. You will hear five beeps, indicating that

the system has received your ID number and

the radio you are calling is on the air.

3. Press ..

4. The radio will return to

the home display.

English

CALL ALERT OPERATION

PLANT POLICE

Answering a Call Alert Page with a Group

Call

1. Upon receiving a Call Alert page, four alert

2. The green LED lights and the Call Received

3. Press the PTT switch to answer the page.

4. The display shows the

5. The ID number of the radio that paged you is

6. Have your conversation in the normal manner;

Note: When you received a Call Alert page, you

PLANT POLICE

tones sounds (repeats every 5 seconds).

annunciator, F, blinks indicating a call is

received.

current talkgroup. The

audible alert, LED and

call received annunciator

turns off.

stored as "the last ID number received."

all members of your talkgroup will hear your

response. Press the PTT switch to talk;

release the switch to listen.

can enter Private Call mode and call the paging

radio using the latest ID received.

FIRE DEPT