Motorola GP340 ATEX 사용자 설명서 - 페이지 15

{카테고리_이름} Motorola GP340 ATEX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP340 ATEX 30 페이지. Professional radio, power distribution and controller
Motorola GP340 ATEX에 대해서도 마찬가지입니다: 사양 시트 (5 페이지), 사용자 설명서 (31 페이지), 사양 시트 (2 페이지), 사용자 설명서 (30 페이지), 기본 사용 설명서 (10 페이지), 서비스 정보 (32 페이지), 서비스 정보 (30 페이지), 서비스 정보 (26 페이지), 서비스 정보 (24 페이지), 서비스 정보 (31 페이지), 서비스 정보 (43 페이지), 서비스 정보 (30 페이지)

RADIO CALLS

You can make a selective call to a particular

radio, known as an individual call, or to a selected

group of radios, known as a group call.

To make a Selective Call :

Press the PTT or Call Button (depending

on the way your radio has been pro-

grammed by your dealer), to set up the

call.

Wait until the conversation has been set

up, which means you are authorised to

use the system.

Talk with your mouth 2.5 - 5cm from the

microphone. Release PTT to listen.

When transmitting the red indicator will

light continuously.

Your radio may be conÞgured for ÔTransmit

InhibitÕ under certain conditions (e.g. when the

channel is in use by others) in which case, the

channel busy tone will sound when you press

the PTT or call button to indicate that

transmission is inhibited.

When the channel is free, the Channel Free

beep

will sound, and you can

make a call.

If your radio is equipped with a transmit time

out timer (TOT), a warning tone

will sound a few seconds

before the transmission is cut off. Your radio

may be programmed to inhibit retransmission

within a preset time.

When you receive a selective call, you will hear

either an individual call alert tone

, or a group call alert tone

and the LED Indicator will

light (yellow).

To answer the call:

Press the PTT button or Call button.

The call will terminate automatically when

the conversation has ended or press the

Monitor button.

English