Motorola MAX638 사용자 설명서 - 페이지 12

{카테고리_이름} Motorola MAX638에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MAX638 41 페이지. Privacy plus trunked mobile radios

페이지 인쇄

This Manual: http://www.manuallib.com/file/2545286

Features And Advantages Of Trunking

Types of Tones

Type of Tone

Meaning

FAILSOFT Contin-

Operating under "failsoft" condi-

uous faint "beep"

tions. A system failure has

every 10 seconds

occurred: the mobile is operat-

ing on one channel in a conven-

tional mode.

Disconnect Mode

Reminder to exit Phone or Call

Warning

Alert Modes. You may be miss-

Continuous illegal

ing other types of calls.

function "baaah"

tone.

Telephone Time-

Warning that the call will be ter-

Out Warning

minated if not completed in 15 to

High pitched 15-20

20 seconds.

second tone.

Talk Prohibit Con-

All unsuccessful attempts to

stant tone when

access the trunked system.

PTT is pressed.

Busy Continuous

All available channels are busy

"bah-bah-bah"

and the radio is in queue.

when PTT is

pressed

TALK PERMIT or

Now you have a channel to

CALL BACK

access.

High-pitched "dih-

dih-dit" tone signi-

fying channel avail-

able

VALID KEY High

Signiﬁes button press was

Pitched Chirp tone

accepted.

INVALID KEY

Inoperative feature or illegal but-

"Bonk" tone when

ton press in current operating

button press is

mode.

rejected.

TIME-OUT-TIMER

Present transmission will end in

Low pitched, con-

four seconds.

tinuous "baaah".

What to Do

You can still transmit and

receive, but you share a channel

with other groups until the sys-

tem is repaired.

Press the Phone or Call button to

exit the mode.

Complete call or hang up. It is

time up to ﬁnish your call or

redial.

Try again, when you are in a bet-

ter location.

Release the PTT switch. You will

hear call back tone when it is

your turn for a channel.

The radio holds the channel

open for about three seconds.

Press the PTT and begin your

transmission.

Proceed with desired function.

Radio is not programmed for this

function or exit a current operat-

ing mode and access desired

function.

Finish your transmission before

your transmitter is disabled.