Motorola MCS 2000 사용자 설명서 - 페이지 4

{카테고리_이름} Motorola MCS 2000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MCS 2000 20 페이지.
Motorola MCS 2000에 대해서도 마찬가지입니다: 설치 매뉴얼 (14 페이지), 개조 지침 (11 페이지)

페이지 인쇄

MCS 2000 Model I

General operation

Radio ON/OFF and Volume Control

Turn the radio on by pressing the on/off button (A).

The radio then carries out a self-test.

Adjust the volume to a comfortable listening level by

turning the on/off button (A).

Note: If equipped, your radio may be pro-

grammed with ignition sense enabled. Depend-

ing on programming, if the ignition is turned off,

the radio will:

• turn off

• inhibit transmit capability, or

• inhibit the use of the PTT button.

Contact your system operator for further infor-

mation.

Turn the radio off by pressing the on/off button (A)

again.

Note: If the radio sounds the error tone and dis-

plays an error message, please contact the per-

son in charge of your radio system or your local

service representative.

Function Selection

Functions programmed into the radio can be selected

in two different ways:

Directly via a pre-programmed, dedicated but-

ton, or

Indirectly via the radio MENU.

Function Button Selection

For direct access to a feature, depress the desired

function button. A triangle in the display points to the

function button used. If the function requires addi-

tional input, use the mode selector (D) to display your

choices, and press the select button (13).

Note: Function buttons are usually active.

Pressing a function button will exit the current

feature and start the selected feature.

Menu Selection

Features may be accessed indirectly through the radio

menu. The menu is selected by pressing the menu

button (9). Selections are made by using the mode

selector (D) to the desired function. Press the select

button (13). The radio will leave menu mode and enter

the selected feature, or enter a sub-menu. If additional

page 4

68P81083C48-B