Motorola MICOM 2E 사용자 지침 - 페이지 3

{카테고리_이름} Motorola MICOM 2E에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MICOM 2E 3 페이지. Amateur general user instructions

At this time you should be able to operate the radio microphone, and volume controls as you normally

would.

If you need to change channels, you can use the UP and DOWN arrow keys if the channel is nearby, or

simply re-enter the three digit channel number, and press ENTER in either case.

PTT Release Beep

If you are informed that when you end your transmission that an end of transmission tone or beep is

occurring, you can remove that tone. Some people find this objectionable, others do not. To stop the tone

proceed as follows: Press MENU, press MORE, press PROG(ram), press RAD(io), Press PRMT

(parameters), press MORE, press PTBP (F1), press Y(es) (F1) or N(o) (F2) for your selection, press

ENTER.

When you are finished with your activities:

Press MENU and select ALE, then press ENTER. Make sure MON(itor) is ON. Unit will begin to scan

the designated frequencies.

LAST UPDATE: 25 MARCH 2008