Epson LABELWORKS LW-1000P 설치 매뉴얼

{카테고리_이름} Epson LABELWORKS LW-1000P에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson LABELWORKS LW-1000P 2 페이지. All-rounded, quality label printing solutions on the go
Epson LABELWORKS LW-1000P에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 설치 매뉴얼 (2 페이지)

페이지 인쇄

Installation Manual

Read this document carefully to use this product safely and correctly.

If your product is faulty, please read the included warranty card and

contact the store you purchased it from. If you require further assistance,

contact your local Epson customer support center.

See the Epson website for more information.

International ENERGY STAR® Compliance Statement

The purpose of the International ENERGY STAR® Program is to promote

the development and popularization of energy-efficient office

equipment.

As an ENERGY STAR® Partner; Seiko Epson Corporation has

determined that this product meets the ENERGY STAR®

guidelines for energy efficiency.

Names and Functions of Parts

Front

button

Turns the printer power ON/OFF.

button

Perform the tape feed operation.

button

Switches the mode in accordance with the

wireless LAN connection method being used.

Switches to the next mode with each press.

Infrastructure Mode/Simple AP Mode/wireless

LAN OFF

The current mode is indicated by the lamps.

Top cover

Can be opened to insert a tape cartridge, or

for print head cleaning.

Safety Instructions

For your safety, read the attached documents carefully to use this product

correctly. After you have read all instructions, keep this manual handy for future

reference and to make your concerns clear.

Items below indicate safety precautions to protect users, their surroundings and

their property from possible injury or damage.

Precautionary notations are categorised as follows according to personal injury

and damage to the equipment if the instructions are ignored or the equipment is

misused.

WARNING

This symbol indicates information that, if ignored, could possibly result in serious personal

injury or even death due to incorrect handling.

CAUTION

This symbol indicates information that, if ignored, could possibly result in personal injury,

physical damage, or damage to equipment due to incorrect handling.

The following describes the meaning of each symbol used in the precautions.

This indicates an

This indicates a

important reminder.

prohibited item.

mandatory procedure.

WARNING

When using the AC adapter and power cable

Do not use any AC adapter or power cable other than the dedicated AC

adapter and power cable. Do not use the AC adapter with other than the

specified voltage also. Otherwise, damage, overheating, fire or electric

shock may occur.

Take the following precautions when handling the AC adapter and power

cable.

• Make sure to avoid octopus wiring.

• Make sure the plug is not dusty before inserting it into an outlet.

• Insert the plug firmly into the outlet.

• Do not hold the AC adapter or the plug with wet hands.

• Do not pull the power cable when disconnecting the plug. Be sure to

hold the plug when disconnecting it.

• Do not make any modification to the AC adapter or power cable.

• Do not apply strong shocks to or put a heavy object on the AC adapter or

power cable.

• Do not bend or twist the AC adapter or power cable forcibly.

• Do not place the AC adapter or power cable near a heater.

Do not use any damaged AC adapter or power cable. Otherwise, damage,

overheating or smoking may occur, which may result in fire or electric

shock.

Do not touch the plug during thunderstorms.

When using this product

Do not apply any strong force or shocks to the product such as standing

on, dropping or hitting it. Otherwise, the product may be broken, which

may result in fire or electric shock. If it is damaged, turn off the power

immediately, unplug the AC adapter, and then contact the Epson customer

support center. Continuous use may result in fire or electric shock.

Take care not to spill any beverage such as tea, coffee or juice onto the

product, or to spray aerosol insecticide. It may cause malfunction, fire,

or electric shock. If any liquid has been spilled on the product, turn off

the power, unplug the AC adapter, and then contact the Epson customer

support center. Continuous use may result in fire or electric shock.

Do not touch the printhead because it becomes very hot. Otherwise, there

is a risk of burns.

Do not open any covers other than the top cover. Doing so may result in

fire or electric shock. Always use the product as instructed in this manual.

Otherwise, damage or injury may occur.

Never modify or disassemble this product. Doing so may cause fire or

electric shock.Do not carry out any operations not described in this

manual, or the product may break or cause injury.

If any of the following abnormalities is observed, turn off the power

immediately, unplug the AC adapter, and then contact the Epson customer

support center.

• If smoke, strange odours or unexpected noises come from the product

• If liquid or foreign objects get inside the product

• If the product has been dropped or damaged

Do not touch the tape eject slot, during printing or when the auto cutter is

in operation. Otherwise there is a risk of injury.

May exert electromagnetic interference on, and cause malfunction of,

cardiac pacemakers. Before using this product, check that there is no one

in the vicinity using a cardiac pacemaker.

May exert electromagnetic interference on, and cause malfunction of,

sensitive medical equipment. Before using this product, check that there is

no sensitive medical equipment in the vicinity.

Use of this product on aircraft may be restricted in some countries. Before

using this product, check that use of this product is not restricted on the

aircraft.

Checking Package Contents

LW-1000P

Tape cartridge

USB cable

AC adapter (AST1527Z1-1)

Documents

• Installation Manual (this sheet)

Describes the setup procedures needed to use the printer, and

provides information on printer problems and safety.

• Supplies Catalog

Epson has a variety of tapes for many different applications.

The Supplies Catalog has information on tape cartridges and

other consumable parts for the printer.

button

Press to open the top cover.

Tape

Tape can be inserted here to cut rounded

insertion slot

corners.

for trimmer

Tape outlet

Printed labels come out here.

lamp

Flashes when an error occurs.

lamp

Indicates the wireless LAN connection status.

10.

lamp

Indicates the wireless LAN connection status.

11.

lamp

Indicates the printer's power status.

When handling the auto trimmer

When removing the trimmer box, make sure to turn the power off. If the

product operates without the trimmer box, injury or damage may occur

with the blade inside the product.

When cleaning the trimmer box, do not touch the trimmer blade, as there

is a risk of injury. Do not insert anything other than labels into the trimmer

inlet slot. Otherwise, damage to the trimmer may occur.

When handling the auto cutter

Do not touch the tape outlet slot (where the labels come out) during

printing or when the auto cutter is in operation. Otherwise, there is a risk

of injury.

When handling the half cutter

Do not touch the tape outlet slot (where the labels come out) during

printing or when the auto cutter is in operation. Otherwise, there is a risk

of injury.

Others

Do not use or store the product, AC adapter, power cable, USB cable or

tape cartridges in the following places.

• In direct sunlight.

• Where it may become extremely hot such as in a vehicle with the

windows closed.

• Where it may become extremely hot such as near a heater or the

temperature becomes very unstable such as near the exhaust duct of an

air conditioner.

• Where the product may get wet due to a shower or rain such as in a

bathroom or outdoors.

• In a dusty place or where the product may be exposed to smoke or steam

such as near the kitchen or a humidifier.

• On an unstable place such as on a shaky table or on an inclined place.

• Where it might be subjected to vibration or shock.

• Near high-voltage power lines or something that generates a magnetic

field.

Keep the plastic bags used to contain the product or this manual out of reach of

children. Children may suffocate if they swallow them or put their heads into the

bags.

CAUTION

When using the AC adapter and power cable

Do not unplug the AC adapter while the product is in operation, otherwise

printing may not be successful.

Do not use the AC adapter in a small, confined space, or cover it with a

cloth. Otherwise, the AC adapter may overheat and deteriorate.

When using this product

Do not stand or put anything heavy on the product or place it on an

unstable place such as on a shaky table or on an incline. Otherwise, the

product may fall and cause injury.

To ensure safety, unplug this product before leaving it unused.

Before cleaning, make sure to unplug the AC adapter from the outlet.

Do not use a moistened cloth or solvents such as alcohol, thinner or

benzine.

Do not block or insert objects into the supplied AC adapter socket or the

tape eject slot.

To comply with RF exposure compliance requirements, a distance of at

least 22 cm must be maintained at all times between the antenna of this

product and people in the vicinity.

Others

The supplied disc is a data DVD-ROM for computers. Do not play it in an

audio DVD player. Otherwise a very loud sound may be emitted, causing

risk to both your hearing and your audio equipment.

Be careful of continuous use of which may cause eye fatigue.

When handling tape cartridges

• Make sure to use a dedicated

LC Tape.

• Some types of tape cannot be cut by the cutter. For the details, refer to the

tape's manual.

• Do not drop it or disassemble it. Doing so may cause damage.

• Do not pull out the tape forcibly by hand. But make sure to feed the tape.

Otherwise, the tape cartridge may be broken and unusable.

• Avoid using a tape cartridge without remaining tape. Doing so may cause

overheating of the printhead, which may result in damage or malfunction.

MEMO

Tape cartridges contain ink ribbons in them. When disposing of tape cartridges,

make sure to follow the local regulations for disposal.

DVD-ROM software

Take care to prevent the DVD-ROM from being subjected to excessive force or

becoming scratched. Do not store the DVD-ROM in excessively hot or cold locations.

Before using the printer, check that you have all the items below.

Contact your place of purchase if anything is missing or damaged.

Label Editor DVD-ROM (for Windows only)

Contains the following items:

Software

• Label Editor

Software used for label editing. Use it to create labels to print

with the printer.

• Network Configuration Tool

Used to check or change the printer's network settings on the

computer connected to the printer.

• Printer driver

To be installed in the computer connected to the printer.

Instruction manuals

• Label Editor User's Guide

Describes how to use the Label Editor software.

• Network Configuration Guide

Provides information not described in this manual on

network connection procedures, settings and connection

troubleshooting.

To view the documents, you need Adobe

Reader.

Rear

USB port

Connects the included USB cable.

LAN port

Connects a LAN cable. *

Security hole

Lets you secure the printer to a desk or post

with a commercial security wire lock or similar

tool.

Power cord jack

Connects the included AC adapter.

button

Press when setting a wireless LAN connection

using WPS.

* Use a twisted-pair, Category 5 or higher, straight-through Ethernet

cable wired for 10BASE-T or 100BASE-TX.

Cleaning

WARNING

To prevent the risk of cuts, never insert fingers in the auto-

trimmer.

CAUTION

Always turn the printer OFF before cleaning.

Always use dedicated tape cartridges having the

Printer

Wipe the printer with a soft, dry cloth.

Never use solvents or chemicals such as benzine, paint thinner or

alcohol. Never use a chemical cloth.

Print head

If streaks or smears appear on

printouts, use a cotton swab or

similar materials to wipe dirt off

the print head.

Press the

button to open

the top cover.

Clean the print head.

Close the top cover.

Frequency Precautions

The frequency band for this product is 2.4 GHz. This frequency range is the

same frequency bandwidth as industrial, scientific, and medical devices such as

microwave ovens and mobile unit identification (RF-ID) systems (licensed premises

radio stations and unlicensed specified low-power radio stations) used in factory

production lines. Before using this product, check that there are no radio stations

for mobile unit identification or specified low-power radio station premises nearby.

In the event that this product should interfere electromagnetically with the

premises of a radio station used for mobile unit recognition, cease use immediately

and stop generating the electromagnetic field. Contact your local Epson customer

support center if this product interferes electromagnetically with a special low-

power radio station used for mobile unit identification or causes similar problems.

International Travel Precautions

Wireless devices are designed to conform to the channel and frequency limits

of the country they are intended to be used in. This product is based on the

specifications of the country of sale. If this product is used outside the country of

sale, check with your local Epson customer support center for more information.

Notes on Security when Using Wireless LAN

(Important information on customer rights (maintaining privacy))

The advantage of using a wireless LAN over a LAN cable is that, because information

is exchanged using radio signals, you can easily connect to the network if you are

within range of the radio signals. A disadvantage of this is that within a certain

range, the electromagnetic signals can pass through barriers such as walls, so that if

security countermeasures are not implemented in some way, problems such as the

following may occur.

• Communicated data can be intercepted

A third party may be able to receive wireless transmissions without

authorization, and they could obtain personal information from these

transmissions such as IDs, passwords, or credit card numbers, or they could

intercept the contents of personal e-mail messages.

• Unauthorized access to the network

A third party could access an individual or intra-company network

without permission and carry out any of the following activities.

- Retrieve personal data or other secret information (information leakage)

- Pose as another user and send inappropriate data (impersonation)

- Overwrite the contents of intercepted data and resend it (falsification)

- Introduce a computer virus which could cause data loss or system crashes

(damage)

Initially, the possibility that such problems could occur through settings

concerning the security of the wireless LAN product and by using the product

are decreased, because the wireless LAN card and the access point have security

measures to deal with these problems. We recommend that you use this

product after making security settings using your own judgment and assuming

full responsibility, and with your full understanding of problems that may occur

if you do not make any security settings.

Epson shall not be responsible for any leakage of data or information during data

communication over wireless LAN.

Other cautions

• Take care not to cut your fingers when cutting the label with scissors.

• Do not attach a label on human bodies, living things, public facilities ore other

people's belongings.

Opening the instruction manuals

Follow the steps below to view the instruction manuals on the

DVD-ROM.

Insert the DVD-ROM in the computer's DVD-ROM drive.

Click "User's Guide" in the following window.

Click

Click the manual you want to read in the following

window.

The selected instruction manual is displayed.

Meanings of lamps

The lamps indicate printer statuses.

Lamp's

Lamp

condition

Lit

Standby status

lamp

Operating (such as initializing, printing or

Flashing

feeding the tape)

Unlit

Power OFF

Printer error

lamp

Flashing

Check the message displayed on the

computer screen.

Unlit

Operating normally

Connected in Infrastructure Mode/

lamp

Lit

initializing printer

Preparing to turn power ON/setting

Flashing

Infrastructure Mode

Connected in Simple AP Mode/wireless

Unlit

LAN OFF

lamp

Connected in Simple AP Mode/initializing

Lit

printer

Preparing to turn power ON/setting Simple

Flashing

AP Mode

Connected in Infrastructure Mode/wireless

Unlit

LAN OFF

Replacing the tape cartridge

Press the

button to open the top cover.

Remove the tape cartridge by pressing in the tabs on both

sides.

Place a new tape cartridge in the printer.

Close the top cover.

Tabs

symbol.

Auto-trimmer

Pull out the tray.

Remove the tape scraps, then

insert the tray back in the printer.

Specifications

Printer

Dimensions

Approx. 123 (W) x 153 (D) x 139 (H)

(mm)

Weight

Approx. 1,080g

Supported tape width

6 mm, 9 mm, 12 mm, 18 mm,

24 mm, 36 mm

Interface

USB 2.0 Full-speed,

wired LAN (10/100BASE-TX),

wireless LAN (IEEE 802.11b/g/n)

Power supply

Type

AST1527Z1-1

Manufacturer

Seiko Epson Corp.

Input

AC100-240V, 0.9A, 50-60Hz

(dedicated adapter, power cable

only)

Output

DC15V, 2.7A

Total output power

41 W

Operating temperature 5 to 35 degrees C

Storage temperature

-10 to 55 degrees C

Operating environment

Operating system

Windows, Mac OS X, iOS, Android

Hard disk space which

Windows: Approx. 300MB,

Label Editor uses

Mac OS X: Approx. 40MB

Drive

DVD-ROM drive

Display

XGA (1024 x 768), High Colour or

higher

Interface

USB 2.0 Full-speed,

wired LAN (10/100BASE-TX),

wireless LAN (IEEE 802.11b/g/n)

See other side for how to use printer.

Printer status