Motorola TALKABOUT T5500 사용자 설명서 - 페이지 21

{카테고리_이름} Motorola TALKABOUT T5500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola TALKABOUT T5500 36 페이지. Frs/gmrs recreational two-way radios
Motorola TALKABOUT T5500에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 커뮤니케이션 매뉴얼 (16 페이지), 사용자 설명서 (5 페이지)

페이지 인쇄

Scanning Channels

Use scanning to monitor channels and codes for transmissions or to find someone

in your group who has accidentally changed channels.

To start scanning, briefly press and release

When the radio detects channel activity, it stops scanning and you can hear the

transmission. To respond to the transmitting, press

Note: If your radio's Interference Eliminator Code is set to

radio checks for activity on each channel regardless of the code used on the

channel. If your radio's Interference Eliminator Code is set to

checks for activity only on channels using codes

ignores channels using code

Advanced Scan

If the radio stops scanning on a channel you do not want to listen to, briefly press

and release

Removing Channels from the Scan List (Nuisance Delete Feature)

To remove a channel so the radio does not stop on it while scanning, press and

hold

for at least 3 seconds, then release. This temporarily removes the

channel from the scan list.

To restore the channel, turn the radio off and then back on.

Note: You cannot remove the channel your radio was set to when you started the

scan (called your home channel).

to resume scanning for the next active channel.

. The scan indicator displays

within 5 seconds.

while scanning, the

and

, the radio