Motorola TETRA MTM800 기본 사용 설명서 - 페이지 21

{카테고리_이름} Motorola TETRA MTM800에 대한 기본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola TETRA MTM800 35 페이지. Enhanced tetra mobile terminal
Motorola TETRA MTM800에 대해서도 마찬가지입니다: 설치 매뉴얼 (3 페이지)

페이지 인쇄

Selecting TMO or DMO Operation

Entering TMO or DMO

Enter TMO or DMO in one of the following ways:

• Press

• Press the TMO/DMO one-touch button (configured by your

Service Provider).

Calls (Trunked Mode Operation)

TMO Group Calls

A Group Call is a communication between you and others in a

talkgroup. A Talkgroup is a pre-defined set of subscribers enabled to

participate in and/or invoke a Group Call.

Talkgroups are divided into ranges. Each range may contain

several talkgroups.

Making a TMO Group Call

1. Press

Mode

2. If this is the required talkgroup and range, press and hold the

PTT. Wait for the talk permit tone and then speak into the

microphone.

Release the PTT button to listen.

3. If you wish to call a talkgroup other than the one shown, scroll

through the talkgroups.

4. To select a range other than the one shown, press Optns,

followed by Range. Scroll through the ranges. Press Ok to select

the range, press Back to cancel range scrolling.

When you start a call, all members of the selected talkgroup who

have their units turned on, will receive the transmission.

The "No Group" message is displayed when you are out of the

normal coverage area of your selected talkgroup. You must then

select a new talkgroup that is valid for your working location.

6 2 1 (TMO) if the MTM800 is in DMO.

6 2 2 (DMO) if the MTM800 is in TMO.

until "Group Mode" appears on your display.