Motorola TETRA MTM800 기본 사용 설명서 - 페이지 24

{카테고리_이름} Motorola TETRA MTM800에 대한 기본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola TETRA MTM800 35 페이지. Enhanced tetra mobile terminal
Motorola TETRA MTM800에 대해서도 마찬가지입니다: 설치 매뉴얼 (3 페이지)

페이지 인쇄

Calls (Private and Phone Calls)

Private Call

A Private Call, also called Point-to-Point or individual call, is a call

between two individuals. No other terminal can hear the

conversation. This call can be:

• full-duplex call (if the system allows) in TMO

• standard half-duplex call in TMO or DMO

Making a Private Call

1. To enter the Private Mode, press

appears on the display.

2. Enter the number of the person you wish to call.

3. Press and release the PTT button. You will hear a ringing tone.

Wait for the called person to answer your call.

4. Press and hold PTT. Wait for the talk permit tone (if configured)

before talking, and release the PTT when listening.

5. To end the call, press

Call Ended message is displayed.

6. Press Back to return to the Private Mode display.

While Transmit Inhibit is activated, an incoming Private Call is

indicated, but it is not possible to answer the call.

Receiving a Private Call

If the Service Provider configured the MTM800 to Automatic Mode

Switch:

1. The MTM800 automatically switches to Private Mode. The

display shows the caller's identity.

2. To answer the incoming call, press PTT.

3. To end the call, press

the mode it was in before the incoming call arrived.

until Private Mode

. If the called person ends the call, the

. The display returns automatically to