Motorola TETRA MTM800 기본 사용 설명서 - 페이지 27

{카테고리_이름} Motorola TETRA MTM800에 대한 기본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola TETRA MTM800 35 페이지. Enhanced tetra mobile terminal
Motorola TETRA MTM800에 대해서도 마찬가지입니다: 설치 매뉴얼 (3 페이지)

페이지 인쇄

Emergency Mode

You can send and receive Emergency Group Calls in

Trunked Mode (TMO) or in Direct Mode (DMO). If your terminal is

configured to operate through a gateway, Emergency calls can be

placed through the gateway.

You can initiate an Emergency Group Call to and receive it from the

selected talkgroup (TMO and DMO).

Your Service Provider will configure the Emergency Alarm and Hot

Microphone features.

Emergency calls will be allocated emergency priority in the system.

Entering or Exiting Emergency Mode (TMO & DMO)

To enter Emergency mode from any mode, press and hold the

emergency key

The required time you need to press the Emergency button is set to

default to 0.5 seconds. The time can be configured by your Service

Provider.

For call alerts, see settings in the Tones menu option.

To exit Emergency mode, press and hold Back. You will switch to

normal Group mode.

Invisible Emergency Mode

If the Invisible Emergency Mode is enabled by your Service

Provider, all the audible and visible indications for operations in

Emergency Mode are disabled.

Only the Emergency Private Call is exception for this feature.

Sending an Emergency Alarm

Your MTM800 will automatically send an Emergency Alarm when in

Emergency mode. This is sent:

•

automatically, upon entering Emergency mode