Motorola APX 8000XE 빠른 참조 카드 - 페이지 2
{카테고리_이름} Motorola APX 8000XE에 대한 빠른 참조 카드을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola APX 8000XE 2 페이지. Digital portable radios
Motorola APX 8000XE에 대해서도 마찬가지입니다: 커뮤니케이션 매뉴얼 (23 페이지), 빠른 참조 카드 (2 페이지), 빠른 참조 카드 (2 페이지)
![Motorola APX 8000XE 빠른 참조 카드](/uploads/products/server2/6113148/6113148.png)
Sending an Emergency Call
1
Press the Emergency button.
2
Press and hold the PTT button. Speak clearly
into the microphone.
3
Release the PTT button to end call.
4
Press and hold Emergency button to exit
emergency.
To exit emergency at any time, press and hold
the Emergency button.
Sending a Silent Emergency Call
1
Press the Emergency button.
2
The display does not change; the LED does
not light up, and there is no tone.
3
Silent emergency continues until you:
Press and hold the Emergency button to exit
emergency state.
OR
Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.
To exit emergency at any time, press and hold
the Emergency button.
Display Status Icons
u
Receiving a call or data.
t
Transmitting a call or data.
8
Blinks when the battery is low.
English
The more stripes, the stronger the
v
signal strength for the current site
(trunking only).
Direct radio to radio communication or
O
connected through a repeater.
On = Direct
Off = Repeater
M
This channel is being monitored.
H
.
L = Radio is set at Low power.
OR
H = Radio is set at High power.
i
Scanning a scan list.
Blinking dot = Detects activity on the
Priority-One Channel
j
during scan.
Steady dot = Detects activity on the
Priority-Two Channel
during scan.
k
The vote scan feature is enabled.
On steady = View mode
Blinking = Program mode
Menu Navigation
< or > to Menu Entry.
{
|
}
,
, or
directly below Menu
Entry to select.
H to exit.
On = Secure operation.
m
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
On = AES Secure operation.
l
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
G
On = GPS enabled, and signal
available.
Off = GPS disabled.
Blinking = GPS enabled, but signal
unavailable.
On = User is currently associated with
n
the radio.
Off = User is currently not associated
with the radio.
Blinking = Device registration or user
registration with the server
failed due to an invalid
username or pin.
o
Data activity is present.
b
Bluetooth is ready.
a
Bluetooth is connected to the device.
U or D to scroll through sub-list.
{
|
}
,
, or
directly below Menu
Entry to select.