Motorola CP040 사용자 설명서 - 페이지 14

{카테고리_이름} Motorola CP040에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CP040 18 페이지. Commercial radios uhf1
Motorola CP040에 대해서도 마찬가지입니다: 자세한 서비스 매뉴얼 (28 페이지), 서비스 정보 (48 페이지), 서비스 정보 (46 페이지), 서비스 정보 (30 페이지)

페이지 인쇄
Motorola CP040 사용자 설명서

SENDING A CALL

1
Turn your radio on.
2
Use the Channel Selector knob to select the
desired channel.
3
Hold the radio in a vertical position, press the
PTT, and talk at a distance of about
2.5 to 5 cm from the microphone.
4
Release the PTT to listen.

RECEIVING A CALL

1
Turn your radio on.
2
Adjust the radio's volume.
3
Switch to the desired channel. To respond,
hold the radio in a vertical position, press the
PTT, and talk at a distance of about
2.5 to 5 cm from the microphone.
English
12

MONITORING

It is important to monitor traffic before transmitting to
ensure that you do not "talk over" someone who is
already transmitting.
1
Press and hold the preprogrammed
Monitor button to access channel traffic.
2
Once channel traffic has cleared, proceed
with your call by pressing the PTT button.
3
A long press of the preprogrammed Monitor
button places the radio in Sticky Permanent
Monitor mode.
•
You hear a high-pitched tone.
A short press of the Monitor button cancels
Sticky Permanent Monitor mode and returns
the radio to normal operation.