Motorola CP160 사용자 설명서 - 페이지 35

{카테고리_이름} Motorola CP160에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola CP160 46 페이지. Uhf2 (438-470mhz)
Motorola CP160에 대해서도 마찬가지입니다: 기본 사용 설명서 (16 페이지), 기본 사용 설명서 (16 페이지), 기본 사용 설명서 (18 페이지), 자세한 서비스 매뉴얼 (28 페이지), Cps/튜너 설치 매뉴얼 (6 페이지), 서비스 정보 (46 페이지), 서비스 정보 (46 페이지)

PHONE

Your radio allows you to place and receive

telephone calls through a repeater (depending on

phone line availability).

D appears on the display when you are in

•

Phone mode.

Your dealer/programmer can preprogram your radio

in one of two ways to enter your access/de-access

code to the repeater.

Immediate Auto – your radio will transmit the

access/deaccess code automatically upon entering

phone mode or disconnecting a phone call. You will

hear a series of tones, and see your access/

deaccess code on the display, indicating that an

access/deaccess code is being sent automatically.

Delayed Auto – your radio will transmit the access

code upon a PTT button press. The de-access code

is sent automatically when you exit phone mode.

When a phone call is received, a ringing tone

sounds, alerting you to answer the phone call.

Press the preprogrammed Phone button and skip to

step 6.

– or –

1 Select a channel that has been programmed

for telephone.

to enter menu mode.

PHONE

until

PHONE

to select

The D appears on the display.

Note:

Press and hold the PTT button to talk. Hold

the radio in a vertical position with the micro-

phone 1 to 2 inches (2.5 to 5 cm) away from

your mouth. Release the PTT button when the

other party wants to talk, both parties will need

to speak in turn.

Disconnect the phone call when the

conversation is completed.

English