Motorola GP1280 Series 기본 서비스 매뉴얼 - 페이지 23
{카테고리_이름} Motorola GP1280 Series에 대한 기본 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP1280 Series 46 페이지. Professional radio, power distribution and controller
Motorola GP1280 Series에 대해서도 마찬가지입니다: 서비스 정보 (32 페이지), 서비스 정보 (30 페이지), 서비스 정보 (30 페이지)
페이지 인쇄
Radio Disassembly — Detailed
6.
After the universal connector tail of the speaker-microphone assembly is removed, the
assembly can be completely removed. If it is necessary to replace the speaker or
microphone, or both, do it while the flex circuit is removed from the front cover. When
reassembling the microphone in its boot, make sure the microphone port faces the round hole
in the bottom of the boot.
6.5
PTT Disassembly
1.
If required, the PTT bezel, and the PTT seal assembly, can be disassembled using a small
screwdriver, as follows:
a.
Pry back the T-tab found inside the front cover (in between the four buttons on the PTT
assembly).
b.
Remove the PTT bezel by slightly bowing it until the top and bottom tabs are released
from the slots in the front cover.
c.
The PTT seal can be easily lifted from the bezel without the use of tools.
Speaker
Universal Connector
Tail
Microphone Boot
Microphone
Speaker Microphone
Flex Circuit Assembly
Figure 3-8 Removal Speaker-Microphone Assembly
PTT Bezel
Tab
Figure 3-9 PTT Removal
Notch In
Speaker @ 12:00
"T" Shaped Retainer Tab
Tab
PTT Seal
Speaker Orientation
Tab @ 12:00
3-9