Motorola GP1280 Series 기본 서비스 매뉴얼 - 페이지 27

{카테고리_이름} Motorola GP1280 Series에 대한 기본 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP1280 Series 46 페이지. Professional radio, power distribution and controller
Motorola GP1280 Series에 대해서도 마찬가지입니다: 서비스 정보 (32 페이지), 서비스 정보 (30 페이지), 서비스 정보 (30 페이지)

페이지 인쇄
Motorola GP1280 Series 기본 서비스 매뉴얼
Option Board Installation
6.
Reassemble the option board to the front cover assembly.
7.
Insert the display flex circuit into the connector on the option board.
8.
Insert the jumper flex circuit into the connector on the option board. Notice the orientation of
the flex circuit. Arrows on the jumper flex point to the correct way of inserting the flex into the
connector.
9.
Replace the retainer by placing the two top hooks into the slots below the speaker in the front
cover; then, pivot the retainer into the front cover. Ensure that all four tab arms snap correctly
into the front cover.
10. With the keypad option board, display, and retainer correctly in place, the front cover assem-
bly can now be reassembled as described in Paragraph 7.6 (Chassis and Front Cover Reas-
sembly).
Retainer
Keypad/Option
Board
Figure 3-12 Changing the Keypad/Option Board
Jumper Flex
Display Flex
3-13