Motorola GP140 Series 사용자 설명서 - 페이지 9
{카테고리_이름} Motorola GP140 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP140 Series 20 페이지. Professional radio, power distribution and controller
Motorola GP140 Series에 대해서도 마찬가지입니다: 서비스 정보 (32 페이지), 서비스 정보 (30 페이지), 기본 서비스 매뉴얼 (46 페이지), 서비스 정보 (30 페이지)
페이지 인쇄
GETTING STARTED
Radio On-Off/Volume Control
ON
•
Turn the On-Off/Volume Control knob clock-
wise to turn on the radio. You will hear the Self
Test Pass Tone and see a green LED if the radio
powers up successfully. If the radio fails its self
test, you will hear the Self Test Fail Tone.
•
Turn the On-Off/Volume Control knob counter-
clockwise, until a click is heard, to turn off the
radio.
Adjusting the Radio's Volume
1. Press and hold the Volume Set key; you will
hear a continuous tone.
2. Turn the On-Off/Volume Control knob and
adjust the volume level.
3. Release the Volume Set key.
Selecting a Radio Channel
Your radio offers sixteen (16) channels for easy
access to required conventional channels. Some
channels on your radio may not be programmed.
Check with your dealer for more information.
Turn the Channel Selector knob clockwise or
counter-clockwise until you reach the desired
channel.
Sending a Call
OFF
1. Use the Channel Selector knob to change to
the required channel.
2. Press the PTT, and speak clearly with your
mouth about 2.5 to 5 cm (one to two inches)
away from the microphone.
3. Release the PTT when you finish speaking.
Receiving a Call
1. Turn your radio on.
2. Adjust its volume level.
3. Switch to the desired channel.
4. If at any time a call comes through, you will hear
the call at the volume level you have set.
English
7