Motorola GP338 사용자 설명서 - 페이지 32

{카테고리_이름} Motorola GP338에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP338 40 페이지. Professional two-way radio
Motorola GP338에 대해서도 마찬가지입니다: 지침 책자 (4 페이지), 지침 책자 (4 페이지), 사용자 설명서 (44 페이지)

페이지 인쇄

Phone

Sending a New Number (for radios with

keypad only)

You enter the phone number by pressing the

relevant keys on the keypad.

Method

Used

Live Dial

Enter the phone number by using

the keypad; the radio sends out the

numbers as the keys are pressed.

Buffered

1. Enter the phone number by

Dial

2. Press and release the PTT; the

The Phone Conversation

Once the radio has connected to the intended

party, you can begin the conversation. Even

though, this is a phone call, your conversation

English

Steps to Take

using the keypad; the radio

saves the numbers selected in a

buffer.

radio sends out the numbers in

its buffer.

mimics a radio call (i.e. both parties speak in

turn).

1. Press and hold the PTT, while talking into the

microphone.

2. Release the PTT when you ﬁnish what you

want to say, and wait for the response.

3. Continue in like manner until the conversation

ends.

Note:

The radio starts a programma-

ble

moment both parties stop

transmitting (talking). If the

Time-Out-Timer expires, the

radio will end the phone call.

Ending the Phone Call

Just as the radio needs to send the access code

when starting a phone call, the radio needs to

send the deaccess code to end the phone call.

The radio can send the deaccess code in any of

the following ways:

•

manual (for radios with keypad only)

Time-Out-Timer

the