Motorola GP366R 사용자 설명서 - 페이지 34

{카테고리_이름} Motorola GP366R에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP366R 47 페이지.

DELETING A NUISANCE CHANNEL

If a channel continually generates unwanted calls/

noise (a "nuisance" channel), you can temporarily

remove it from the scan list by performing a

Nuisance Channel Delete operation:

While the radio is on the Nuisance

Channel, press and hold the Nuisance

Delete button until you hear the scan start

alert tone.

Release the Nuisance Delete button.

Note: You cannot perform a Nuisance Channel

Delete on a priority channel or if there is only

one remaining channel in the scan list.

ADDING A DELETED NUISANCE CHANNEL

BACK INTO THE SCAN LIST USING THE

SCAN BUTTON

Press the Scan button to stop scanning.

The scan stop alert tone will sound.

Press the Scan button again to re-start

scanning. The scan start alert tone will

sound, and the scan list will contain all

programmed channels.

English

Follow the instructions for selecting Scan

On/Off via the menu

Select Scan Off. Your radio will stop

scanning, the scan stop alert tone will

sound, the display icon G and the LED

indicator will be extinguished.

Select Scan On. Your radio will re-start

scanning, the scan start alert tone will

sound, the display icon G will be lit , the

LED indicator will blink green and the scan

list will contain all programmed channels.

You can call forward calls to your radio to another

radio if you are unable to take calls or are away

from your radio.

You can switch On or Off Call Forward by using

a preprogrammed Call Forward button or via the

menu.