Motorola GP68 설치 및 운영 매뉴얼 - 페이지 32

{카테고리_이름} Motorola GP68에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GP68 44 페이지. A high performance radio in a class of its own
Motorola GP68에 대해서도 마찬가지입니다: 운영 매뉴얼 (19 페이지), 매뉴얼 (18 페이지), 서비스 매뉴얼 (13 페이지), 운영 매뉴얼 (20 페이지)

페이지 인쇄

Model ST-865M3 SmarTrunk II ™ Logic Board

Table 4-1 summarizes the programmable features, the keypad

sequence for programming, and the default values as provided by the

factory.

Each feature programmed requires the following steps:

Enter a two digit programming code.

Press the # key (indicates end of programming code sequence).

Enter the data necessary to program that feature.

Press the # key (indicates end of data sequence).

Many of the programmable parameters required for proper operation

of the ST-865M3 MUST be provided by the System Operator/Manager.

These features are indicated by an asterisk (*) at the beginning of the

feature name.

After each feature is successfully programmed, a high frequency beep

will be generated. A low frequency beep indicates an error was made

in the programming sequence and the sequence should be repeated.

To return the radio to normal operation after programming is complete,

turn the power of the radio off and then back on.

See (Table 4-1) ~ Programming Options Summary Table.

This program code sets the number of trunking chan-

nels that are used in a SmarTrunk II trunking system.

To program the number of trunking channels: Enter the

program code 10 followed by the # key, then the number

of trunking channels in your system, followed by the #

key.

Example:

If your trunking system is a five channel

system press: 1 0 # 5 #.