Motorola GTX 사용자 설명서 - 페이지 17

{카테고리_이름} Motorola GTX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola GTX 36 페이지. 900mhz two way mobile radio
Motorola GTX에 대해서도 마찬가지입니다: 사용자 설명서 (49 페이지), 서비스 매뉴얼 (30 페이지), 설치 매뉴얼 (19 페이지), 사용자 설명서 (25 페이지)

페이지 인쇄

INTRODUCTION

The Call Alert page feature enables your radio to function like a

pager (beeper). Your radio can receive and respond to pages from

other radios. Up to eight (8) mobile IDs (identified as CA1 through

CA8) can be programmed into the radio by your authorized

Motorola dealer.

SENDING A CALL ALERT

The Call Alert feature allows the dispatcher or supervisory unit to

alert or page up to eight mobile units.

1. To send a Call Alert page, press the

Call button twice. The display will

indicate:

2. Select a mobile ID from the ID list by pressing the Talkgroup

Select

3. Press the PTT button to select and send the Call Alert.

•

The radio will beep once to indicate

that the Call Alert has been sent.

When the Call Aler t has been

acknowledged the display will indi-

cate:

•

The radio will sound four beeps and the display will automat-

ically return to the last selected trunked mode/talkgroup.

OTE:

If the radio is not in service or out of range, a low-pitched alert tone will

sound and the display will indicate "noS" . You may try this sequence

again when in range.

•

An illegal function tone will sound after six (6) seconds of

inactivity. This is to alert you that important channel activity

may be missed if you remain in Call Alert. Press the

Call button to stop the tone.

4. To exit Call Alert, press the

Call Alert™ Operation

buttons.

Home button.