Motorola MCS 2000 II 사용자 설명서 - 페이지 17

{카테고리_이름} Motorola MCS 2000 II에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MCS 2000 II 20 페이지.

페이지 인쇄

receive is disabled. Refer to the KVL instruction man-

ual for loading procedure.

Note: For some earlier radio models, enter the

keyloading mode by pressing and holding the

secure button (4) until the display changes

showing the secure menu's ﬁrst item. Scroll to

the "KEYLOAD" choice, and press the select

button. To exit, press the home button.

When the key has been loaded successfully, the radio

will sound one long beep.

To erase a key, press and hold the secure button (4)

until the display changes showing the secure menu's

ﬁrst item "ERASE KEY", and press the select button.

When key erase is complete, the display will show

"ERASED".

Note: If battery power is removed from the radio for

more than 3 days, the radio may lose its encryption

key.

Data Operation

If your radio is programmed for data operation, you

may send and / or receive data messages from a data

terminal. While sending or receiving data, the radio

will display

MCS 2000 Models II & III

DATA TRANSFER

Any button press will cause the radio to interrupt the

data transfer and return the radio to normal operation.

Please contact the person in charge of your radio sys-

tem for further information.

Radio Care

• Avoid any physical abuse of the radio.

• The radio exterior should be cleaned with a cloth

dampened with clean water, a mild liquid soap

solution or isopropyl alcohol.

CAUTION

The use of chemicals such as detergents,

alcohol (except isopropyl), aerosol sprays,

and petroleum products may be harmful and

damage the radio housing.

Safety Information

Every radio, when transmitting, radiates energy into

the atmosphere which may, under certain conditions,

cause the generation of a spark.

All users of vehicles ﬁtted with radios should be aware

of the following warnings:

DATA TRANSFER

68P81083C49-B

page 17