Motorola MTP850 기본 사용 설명서 - 페이지 33
{카테고리_이름} Motorola MTP850에 대한 기본 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola MTP850 42 페이지. Digital car kit
Motorola MTP850에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 설치 매뉴얼 (8 페이지)
페이지 인쇄
Emergency Mode
You can send and receive Emergency Group Calls in Trunked
Mode or in Direct Mode. If your terminal is configured to operate
through a gateway, Emergency calls can be placed through the
gateway.
You can initiate an Emergency Group Call to and receive it from
• the selected group (TMO and DMO) (if tactical emergency) or
• a pre-defined group (if non-tactical emergency).
Contact your Service Provider to know which is the selected mode.
Your Service Provider will configure the Emergency Alarm and Hot
Microphone features.
Emergency calls will be allocated emergency priority in the system.
Entering or Exiting Emergency Mode
To enter Emergency Mode, press and hold the Emergency button
at the top of the MTP850.
The required time you need to press the Emergency button is set to
default to 0.5 seconds. The time can be configured by your Service
Provider.
To exit Emergency Mode, press and hold Exit. Your terminal will
switch to the Home display.
Sending an Emergency Alarm (TMO Only)
Your MTP850 will send an Emergency Alarm to the dispatcher (if
configured by your Service Provider):
• Automatically, upon entering Emergency Mode.
• If you press the Emergency button again while the MTP850 is in
Emergency Mode.
After sending the alarm, the display will show one of the following
delivery reports:
• Alarm Sent
• Alarm Failed
In both cases, the display returns within a few seconds to the
main screen of the Emergency Mode
The Emergency Alarm is a special status message sent to the dispatcher
monitoring the selected group. This can be used in dispatch systems to
highlight emergency calls.
.
31