Motorola Mts-2000 소유자 매뉴얼 - 페이지 43

{카테고리_이름} Motorola Mts-2000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola Mts-2000 44 페이지. Digital cable receiver

Connecting Dolby ® 5.1, TV, VCR and A/V Receiver

1. Connect an RF cable between the cable wall outlet and the CABLE IN

connector on the DCT.

2. Connect the RF coaxial cable, supplied with the DCT, between the

RF IN and TO RF IN connectors on the DCT.

3. Connect an optical audio cable between the OPTICAL connector on the

DCT2000 and the OPTICAL connector on the A / V receiver.

4. Connect a stereo audio cable between the VCR AUDIO OUT R and L

connectors on the A / V receiver and the INPUT AUDIO R and L

connectors on the stereo VCR.

5. Connect a video cable between the VIDEO connector on the DCT

and the CABLE / TV VIDEO connector on the A / V receiver.

6. Connect a stereo audio cable between the OUTPUT AUDIO R and L

connectors on the stereo VCR and the AUDIO VCR IN R and L connectors

on the A/V receiver.

7. Connect a video cable between the INPUT VIDEO connector on the stereo

VCR and the VIDEO VCR OUT connector on the A / V receiver.

8. Connect a video cable between the OUTPUT VIDEO connector on the

stereo VCR and the VIDEO VCR IN connector on the A / V receiver.

9. Connect a video cable between the INPUT VIDEO connector on the stereo

TV and the TV / MONITOR OUTPUT VIDEO connector on the A / V

receiver.

Cable connections marked with an * are optional. These connections allow the

use of the DCT and TV without powering-on the VCR and A/V Receiver.

The optional connections are:

• Connect a RF coaxial cable between the TO TV / VCR connector on the

DCT and the CABLE / ANTENNA IN connector on the stereo VCR.

• Connect a RF coaxial cable between the To TV connector on the stereo

VCR and the CABLE / ANTENNA IN connector on the stereo TV.

When using the Dolby ® 5.1 optical output, the SPDIF and left / right

baseband audio connections to the A / V receiver are not used.

Connecting the DCT