Motorola PR400 Commercial Series 브로셔 및 사양 - 페이지 8
{카테고리_이름} Motorola PR400 Commercial Series에 대한 브로셔 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola PR400 Commercial Series 15 페이지. Portable and mobile series
페이지 인쇄
PM400 Mobile
PM400 Features
• 64 Channels
• Up to 8 Programmable Features
• VHF and UHF Frequencies
• Transmit Time-Out Timer
• Busy Channel Lockout
• Voice-Operated Transmit (requires voice-activated
microphone)
• Private-Line/Digital Private-Line Code Editing
• TPL Standard and Non-Standard Reverse Burst
(for better compatibility with fleets)
• Privacy Codes (42 standard TPL codes, 84 standard
DPL codes and non-standard codes)
• System Scan and Auto Scan
• Supports Up to 16 Scan Lists of Up to 16 Channels Each
• Single and Dual Priority Scan (frequently scans
higher-priority channels)
• Revert Scan (radio moves automatically to last landed
scan channel when exiting scan mode)
• Scan Talkback (respond to transmission while scanning)
• Adjustable Backlight Intensity
• Quik-Call II
TM
Signaling Encode/Decode
– Selective Call: Calls a specific group or individual
– Call Alert: Notifies a specific group or individual user
with an alert tone and lighted LED
64 Channels
8-Character Alphanumeric Display
with User-Friendly Icons
Assign a name to each channel for
ease of use
Up/Down Channel Selector and
Menu Scroll Buttons
4-Watt Front-Projecting Speaker
Die-Cast Housing with Polycarbonate
Outer Casing
4 Programmable Buttons (P1, P2, P3, P4)
Customize shortcuts for up to 8 favorite
features with a short/long press
Red/Yellow/Green LED Indicators
Rotary On/Off/Volume Control
• MDC1200 Signaling
– PTT ID Encode/Decode: Sends unique four-digit
(Caller ID) information when transmitting on the
current MDC system
– Selective Radio Inhibit Decode: Dispatcher can
remotely disable radio to prevent transmission from
reaching stolen or inactive radios
– Radio Check Decode: Dispatcher can determine
remotely if radio is powered on without
disturbing user
– Emergency Encode: Causes an MDC Emergency
Signal to be transmitted on the current MDC system
• DTMF Signaling
– PTT ID Encode: Sends unique one to eight-digit ID
(Caller ID) information when transmitting on the
current DTMF system, which can be displayed on
radios equipped with DTMF decoding capabilities
– Selective Call/Call Alert Encode
• Call Tone Tagging (special tone for a particular call)
• 2-Year Standard Warranty