Motorola PRO7150 기본 서비스 매뉴얼 - 페이지 29

{카테고리_이름} Motorola PRO7150에 대한 기본 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola PRO7150 30 페이지. Pro series

Radio Reassembly — Detailed

3.7.7 DTMF Retroﬁt Kit Procedure (Optional Upgrade Procedure)

If you are performing an upgrade from a PRO5150 or PRO5350 model with no keypad to a PRO5150

or PRO5350 DTMF model, replace the existing front cover kit with kit number HLN9987 and follow the

reassembly steps to reassemble the upgraded radio. (See paragraph 3.7 for details about

reassembly.)

To activate the retroﬁt using the radio software, follow these steps:

1. Start the Customer Programming Software (CPS).

2. Read the codeplug data by clicking on the READ icon in the menu bar, or by selecting READ

DEVICE in the pulldown menu.

3. Open the Radio Conﬁguration dialog box. (See Figure 3-12.)

4. Change the Keypad Conﬁguration from "No Keypad" to "Programmable/Numeric".

5. Write the codeplug back to the radio by clicking on the WRITE icon in the menu bar, or by

selecting WRITE DEVICE in the pulldown menu.

NOTE The CPS may display a warning dialog box when you attempt to write the codeplug

back to the radio. It is safe to ignore this warning. Press the OK button.

Figure 3-12. Activating the Retroﬁt

3-13