Motorola RADIUS GP300 사용 설명서 - 페이지 31

{카테고리_이름} Motorola RADIUS GP300에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola RADIUS GP300 47 페이지. Portable radios
Motorola RADIUS GP300에 대해서도 마찬가지입니다: 매뉴얼 (15 페이지)

페이지 인쇄

DTMF Telephone Interconnect

DTMF Preprogrammed Access/Deaccess Codes

1. Press the [PHN] button to activate the numeric keypad

for a DTMF transmission.

2. Press the [MEM] button, then select the [*] button for

the preprogrammed access code or the [#] button for

the preprogrammed deaccess code. The radio auto-

matically keys and sends the desired string of digits.

3. After the string is transmitted, other digits may be sent

by pressing the desired DTMF numeric buttons.

DTMF Preprogrammed Repertoire List

1. Press the [PHN] button to activate the numeric keypad

for a DTMF transmission.

Press the [MEM] button, then select a digit [1 - 9]. The radio

automatically keys and sends the desired string of digits.

3. After the string is transmitted, other digits may be sent

by pressing the desired DTMF numeric buttons.

DTMF Last Number Redial

Manually dialed DTMF numeric digits are collected while

the DTMF keypad function is active. To access this stored

string of digits:

1. Press the [PHN] button to activate the numeric keypad

for a DTMF transmission.

2. Press the [MEM] button, then select [0] numeric digit.

The [0] number location is used for storage of the last

number redial function. The radio automatically keys

and sends out the stored DTMF digits. This set of num-

bers is saved in memory until the radio is turned off or

until another DTMF digit is dialed.

Dealer Programmed Control Buttons

Two dealer programmable control buttons, [P1] and [P2],

which can be programmed through the Radio Service Soft-

ware available at your local Motorola dealer are also pro-

vided with the DTMF keypad model of the GP300. These

additional control buttons function similarly to the buttons

on the side of the radio.

GP300 Portable Radios