Motorola TALKABOUT T82 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Motorola TALKABOUT T82에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola TALKABOUT T82 24 페이지. Walkie-talkies
Motorola TALKABOUT T82에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지), 소유자 매뉴얼 (39 페이지)

페이지 인쇄

•

Priority is given to the "Home Channel" (For example, the

channel and Sub-Code your radio is set to when you start

the scan). This means the initial channel (and code

settings) is scanned more often than the other seven

channels and your radio will respond quickly to any

activity occurring on the home channel as a priority.

To start Basic Scanning:

1. Press the

Scan/Monitor button briefly. The Scan

icon appears in the display and the radio begins to scroll

through the channel and code combinations.

2. When the radio detects channel activities matching the

channel and Sub-Code combination, the radio stops

scrolling and you can hear the transmission.

3. Press the PTT button within 5 seconds after the end of

the transmission to respond and talk to the person

transmitting.

4. The radio resumes scrolling through the channels 5

seconds after the end of any received activity.

5. Press the

Scan/Monitor button briefly to stop scanning.

To start Advanced Scanning:

1. Set home channel's Sub-Code to "zero" or OFF.

2. Press the

Scan/Monitor button briefly. The Scan

icon appears in the display and the radio begins to scroll

through the channels. No Sub-Codes filters what is

heard.

3. When the radio detects channel activities with any code

(or NO code), it stops scrolling and you can hear the

transmission. Any Sub-Code that may be use by other

party will be detected and displayed.

4. Press the PTT button within 5 seconds after the end of

the transmission to talk.

5. The radio resumes scrolling through the channels 5

seconds after the end of any received activity.

6. Press the

Scan/Monitor button briefly to stop scanning.

Note:

1. The transmission will be on the "Home Channel" if you press the PTT

button while the radio is scrolling through inactive channels. You may

press the

Scan/Monitor button to stop scanning at any time.

2. You may immediately resume the scan by briefly pressing

the radio stops on an undesired transmission.

3. You may temporarily remove that channel from the scan list by

pressing and holding

repeatedly on an undesired transmission. You may remove more

than one channel this way.

4. Turn the radio OFF and then ON, or EXIT and re-enter the scanning

mode by pressing

Scan/Monitor to restore the removed

channel(s) to the scan list.

5. You cannot remove the "Home Channel" from the scan list.

6. In the Advanced Scan, the detected code is used for one

transmission. You must take note of that code, exit scan, and set the

detected code on that channel to permanently use.

for 3 seconds if the radio stops