Motorola clp446 사용자 설명서 - 페이지 31

{카테고리_이름} Motorola clp446에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola clp446 46 페이지. Clp series two-way radio
Motorola clp446에 대해서도 마찬가지입니다: 사용자 지침 (9 페이지), 빠른 참조 (35 페이지)

페이지 인쇄

What to do if cloning fails

The radio emits an audible "bonk" indicating that

the cloning process has failed. In the event that

cloning fails, try performing each of the following

before trying to start the cloning process again.

Make sure that the radio batteries on both

radios are fully charged.

Verify the cloning cable connection on both

Single Unit Chargers.

Make sure that the battery is engaged

properly on to the radio.

Make sure that there is no debris in the

charging tray or on the radio contacts.

Verify that the source radio is in cloning

mode.

Make sure that the radio to be cloned is

turned ON.

Make sure that radios are both from the

same type (same frequency band, same

region and same transmission power).

Note:

This cloning cable is designed to operate

only with compatible Motorola Drop-in Tray

Single Unit Charger. When ordering the

cloning cable, please refer to CLP Series

Cloning Cable Kit P/N HKKN4026. For

details about accessories, refer to

"Accessories" Section on page 36.

English