Motorola HS830 HANSFREE 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} Motorola HS830 HANSFREE에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola HS830 HANSFREE 13 페이지. Module with bluetooth technology
Motorola HS830 HANSFREE에 대해서도 마찬가지입니다: 매뉴얼 (49 페이지), 빠른 시작 매뉴얼 (2 페이지), 여기에서 시작하기 매뉴얼 (20 페이지)
페이지 인쇄
Action
4 Peel the backing off the back of
the adapter and mount the adapter
to the helmet in the desired
location.
5 Peel the backing off the Velcro
the speaker. Place the speaker
inside the helmet where it will be
close to your ear.
Alternatively, insert the tie wrap
through the slots on the back of
the speaker and use the tie wrap
to strap the speaker inside the
helmet. You may have to push the
tie wrap through the liner of the
helmet.
4
Action
2 Insert the HS830 Wireless Module
into your helmet adapter. Slide
your Wireless Module completely
onto the audio plug in the helmet
adapter.
Microphone
Helmet Adapter
Wireless Module
3 Close the helmet adapter cover
completely to secure the Wireless
Module.
4 While wearing the helmet, point
the microphone boom close to
your mouth for best voice pickup.
6
®
on
Latch
Plug
Action
6 Point the microphone toward your
mouth.
For best performance, the side of
the microphone with the white dot
on it should be closest to your
mouth.
Installing the Wireless
Module
Action
1 Press the outside latch to open the
helmet adapter cover.
5
Pairing Your Wireless
Module and Phone
With the headset and phone near each
other:
Action
1 With the wireless module off,
press and hold the MFB until the
LED remains on (about 5
seconds).
2 Perform a device discovery from
your phone.
For details on device discovery
for your phone, refer to the
phone's user's guide.
When the scan is complete, your
phone displays the devices found.
7