Motorola HS850 - Headset - Over-the-ear 사용자 설명서 - 페이지 5
{카테고리_이름} Motorola HS850 - Headset - Over-the-ear에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola HS850 - Headset - Over-the-ear 9 페이지. With bluetooth technology
Motorola HS850 - Headset - Over-the-ear에 대해서도 마찬가지입니다: 문제 해결 (1 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (36 페이지)
페이지 인쇄
Note: You can also use a
Motorola Original™ Vehicle Power
Adapter to charge your headset while in
your vehicle.
A fully charged headset battery provides
approximately:
• talk time
8 hours
–
• standby time (boom open)
hours
Pairing Your Headset
and Phone
Note: You must pair your headset and
phone before you can make a call.
"Pairing" creates a link between
devices equipped with Bluetooth
wireless technology and allows the
phone to remember your headset's
Using Your Headset
Step
2 Perform a device discovery from
the phone.
For details on device discovery
for your phone, refer to the
phone's user's guide.
When the scan is complete, the phone
displays the devices found.
3 Select the Motorola HS850 from the
discovered devices list and confirm
following the on screen prompts.
4 When prompted by the phone, enter
the passkey 0000 and confirm to pair
the headset with the phone.
The device ID is now stored in the
phone's memory.
Pairing is successful when the
headset indicator flashes 10 times
rapidly.
Using Your Headset
200
–
15
17
unique ID. After your headset and phone
are paired, your headset automatically
connects to your phone any time you
open the boom.
With your headset and phone in close
proximity:
Step
1 Put your headset into pairing mode.
a With the headset's boom closed,
press and hold the Multifunction
Button E until the headset
indicator turns on (about
3 seconds).
The headset indicator turns on.
b Release the button, then open the
headset boom.
The headset indicator remains on.
16
Using Your Headset
Pairing to Additional
Devices
Your headset can store pairing
information for up to eight different
devices that have Bluetooth wireless
technology. Devices are stored in a
"Paired Device List" in memory in
chronological order. When an attempt to
pair to more than eight devices is made,
the oldest paired device is removed
from the list.
Any of the eight paired devices can
initiate a paired connection to your
headset.
Your headset will only automatically
initiate a paired connection (by opening
the boom) with the last device it was
connected to. If you want to connect
your headset to another device in the
18
Using Your Headset