Motorola HT820 - Headset - Behind-the-neck 여기에서 시작
{카테고리_이름} Motorola HT820 - Headset - Behind-the-neck에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Motorola HT820 - Headset - Behind-the-neck 5 페이지. Motorola bluetooth stereo headphones instruction guide
Motorola HT820 - Headset - Behind-the-neck에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지)
페이지 인쇄
Start Here > > >
Bluetooth®
Stereo Headphones
CHARGE
1
Your Headphones' Battery
Before using your HT820 for the first time,
charge the headphones for 2 hours:
Charger
Plug the Motorola charger into the
1
headphones. The indicator light turns on
when the battery is charging. When the
headphones' battery is fully charged, the
indicator light turns off.
2
Disconnect the charger.
Note: Headphones do not function while charging.
You can also use a Motorola Original™
Vehicle Power Adapter to charge your
headphones while in your vehicle.
)
A fully charged battery provides
approximately: 14 hrs of music listening, 17
hrs of talk time, or 500 hrs of standby time.
HT820
Insert Charger
Here
Music Button
Indicator
Light
(Right Side)
USE THE HT820
Before using this product, read the Important Safety and
Legal Information pamphlet and follow its instructions.
You can use your HT820 headphones
simultaneously with a Bluetooth A2DP
enabled audio device and your Bluetooth cell
phones!
Listen to music, hear a beep, and transfer to
take the call on the headphones. Hang up the
call with a push of a button and your music
automically continues playing.
Any Bluetooth
Enabled Audio
o
Device*
Ready to make it work?
- Charge your Headphones for 2 Hours (CHARGE)
- Pair headphones & audio device (PAIR)
- Pair phone & headphones (back side of this guide)
- Listen to music and take calls!
*The Bluetooth Enabled Audio Device must be A2DP compatible
2
PAIR
Before you can use your headphones with a
Bluetooth enabled product, you must pair it
with that product. To pair:
Make sure your headphones are turned off
1
(see Turning On and Off ) and press and
hold the left side Call
seconds until the indicator light turns on and
remains steadily lit.
Call Button with
Indicator Light
(Left Side)
2
Next, put your Bluetooth Enabled audio
device in pairing mode so the devices can
"talk" to each other.
For details about putting Bluetooth
Enabled devices in pairing mode, refer to
the device's User's Guide for directions.
Note: To pair the headphones with your phone, see "Pair
with your Phone," on the reverse side of this guide.
HT820
Bluetooth
Enabled
Phone
m
button for 6